Read Sony HDR-XR500 / HDR-XR500E / HDR-XR500V / HDR-XR500VE / HDR-XR520 / HDR-XR520E / HDR-XR520V / HDR-XR520VE (serv.man2) Service Manual online
1-4
ENGLISH
JAPANESE
ENGLISH
JAPANESE
HDR-XR500/XR500E/XR500V/XR500VE/
XR520/XR520E/XR520V/XR520VE_L2
XR520/XR520E/XR520V/XR520VE_L2
1-5. METHOD OF COPING WITH SHIFT LENS ERROR
about 330 msec
Fig. 2
Change in output voltage of R1316 on the VC-557 board
Note: The length of low section will vary a little depending on the
conditions.
1-5-1. E : 62 : 02 [Abnormality of IC for Steadyshot] Occurred
Order
Procedure
1
Turn the power OFF.
2
While measuring with an oscilloscope the output voltage of R1316 in the periphery of IC1301 on the VC-557 board, turn the
power ON to check that the output voltage immediately after the power on change as shown in Fig. 2.
power ON to check that the output voltage immediately after the power on change as shown in Fig. 2.
3
If the output voltage change as shown in Fig. 2, replace the lens block (Note). If it does not change as shown in Fig. 2, inspect
the camera control circuit (IC1301 of VC-557 board) periphery.
the camera control circuit (IC1301 of VC-557 board) periphery.
Note: When the lens block was replaced, start the Adjust Manual in the Adjust Station and execute the necessary adjustment
items.
After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in the
handheld operation.
After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in the
handheld operation.
Fig. 1
Measurement points on the VC-557 board
VC-557 BOARD (SIDE A)
IC1301
R1316
IC5501
R5524
R5527
Click on the first or last page to see other HDR-XR500 / HDR-XR500E / HDR-XR500V / HDR-XR500VE / HDR-XR520 / HDR-XR520E / HDR-XR520V / HDR-XR520VE (serv.man2) service manuals if exist.