HDR-UX3E, HDR-UX5, HDR-UX5E, HDR-UX7, HDR-UX7E (serv.man3) - Sony Movie Service Manual (repair manual). Page 22

6-19

HDR-UX3E/UX5/UX5E/UX7/UX7E_ADJ

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. STEADY HALL Adj. (UX7/UX7E only)
3. HALL Adj.
4. MR Adj.
5. Differential Gain Adj.
6. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) If “1. Data Setting during Camera Adj.” completed success-

fully, and the items from “2. STEADY HALL Adj.” to “4. MR
Adj.” will be executed.

4) Upon successful completion of the “4. MR Adj.”, the follow-

ing message is displayed. Set the subject in accordance with
the message.

5) Click the [OK] button, and the “5. Differential Gain Adj.” will

be executed.

6) Upon completion of “5. Differential Gain Adj.”, “6. Release

of Data Setting during Camera Adj.” is executed.

7) Upon successful completion of all items of the CAMERA Ad-

justment 1, the following message is displayed. Click the [OK]
button.

The EEPROM data of the board for service has already been ini-
tialized, not requiring further initialization when the board is re-
placed.
Execute this processing only when the EEPROM is replaced.
If the EEPROM data is initialized, all the camera adjustment data
is also initialized. All items of the camera adjustments must be
performed after the initialization of EEPROM data.

[Initializing method]
1) Click the [Initialization of EEPROM Data] button on Camera

Adjustment screen, and the following screen will appear.

2) Select the model name with the Model Name List.

3) Click the [Data Write] button.

4) The writing finishes when the following message is displayed.