JSR 625 (serv.man2) - JBL Audio User Guide / Operation Manual

JSR

625

JSR625 Owners Manual  7/28/98 10:53 AM  Page 1

The lightning flash with arrowhead 
symbol, within an equilateral triangle, is 
intended to alert the user to the presence 
of uninsulated "dangerous voltage" within 
the product's enclosure that may be of 
sufficient magnitude to constitute a risk 
of electric shock to persons.

The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important 
operating and maintenance (servicing) 
instructions in the literature accom-
panying the appliance.

Date of purchase ________________________

Purchased from _________________________

Address of business purchased from _________

______________________________________

Installed by _____________________________

Date Installed ___________________________

Serial No. ______________________________

This reminder is provided to call the CATV
system installer’s attention to Article 820-
40 of the NEC that provides guidelines for
proper grounding and, in particular, speci-
fies that the cable ground shall be con-
nected to the grounding system of the
building, as close to the point of cable
entry as practical.

Thank you for choosing a JBL Audio/Video Receiver.

Your new Unit is an exceptionally well-engineered product that will
give you years of superb performance.

It is essential for shipping should you move, or in the event the
unit ever needs repair.

U.S. and Canadian customers should use 120 volt AC only. Other
customers should use voltages appropriate to their area.
Connecting the unit to an outlet supplying a higher voltage may
create a fire hazard.

TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.

POUR EVITER LES CHOCS ELEC-

TRIQUES, INRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU’AU FOND.

■

To disconnect the plug from the AC outlet, pull on the plug

itself, not on the cord.

■

Disconnect the plug from the AC outlet whenever the unit is to

be left unused for an extended period of time.

■

Do not place furniture or other heavy objects on the cord, and

avoid dropping heavy objects on it. Also do not make a knot in
the cord.

Avoid installing it:

■

In moist or humid places

■

Close to heating equipment or in places exposed to direct

sunlight

■

In a direct draft from an air conditioner or in other very cold

locations

■

In places subject to excessive vibration or dust

■

In poorly ventilated places

Before moving the unit, be sure to unplug the power cord from
the AC outlet and disconnect all wires to antennas and other
components.

Do not attempt to service this unit. Tampering with internal compo-
nents can cause fire or shock, and may void your guarantee. If
water or a small object enters the unit, unplug the power cord
immediately and consult an authorized JBL service center. Using
the unit under such conditions may cause a fire or shock hazard. 

Remove dust by wiping the unit with a soft, dry cloth. If necessary,
use a soft cloth lightly dampened with mild soapy water; then wipe
with a dry cloth. Never use benzene, thinner, alcohol or other
volatile agents, and avoid spraying insecticides near the unit.

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for

help.

CAUTION: Any changes or modifications in construction of this
device which are not expressly approved by the party responsible
for compliance could void the user’s authority to operate the
equipment.

2

JSR625 Owners Manual  7/28/98 10:53 AM  Page 2

3

JSR625 Owners Manual  7/28/98 10:53 AM  Page 3

4

MHz

FM

PRESET

MEM

Headphones

TV/VCR 2

Surround

Tape Mon

VCR1

FM

CD

Aux

AM

Bass

Treble

Balance

Tune/Preset

Tune/Preset

Memory

Seek Stereo

Volume

VCR 2

8

3

9

6

7

2

1

4

5

10

13 11

16

14 12

15

Surround Off

Press this button to turn the power on. Press again to turn the
power off. If you connect the other components to the switched
outlet, it can also be used as a system power button.

Stereo headphones can be plugged into this jack for private listen-
ing. Headphone impedance should be between 8 and 2K ohms.
Best results between 200 and 400 ohms.

Modifies the low-frequency sound of the left and right channels as
much as ± 10dB. Set this control at a suitable position for your
taste and room acoustics.

Modifies the high-frequency sound of the left and right channels as
much as ± 10dB. Set this control at a suitable position for your
taste and room acoustics.

This control is used for balancing the relative sound volume of the
left and right channel speakers. Clockwise rotation reduces the vol-
ume from the left speaker, counterclockwise rotation reduces the
volume from the right speaker.

Press this button to select the desired surround mode. The 
mode is changed between normal DOLBY Pro Logic and 
DOLBY 3-STEREO.

Defeats all surround modes.

Press these buttons to select the desired input source.

Press this button to select input from a tape deck.

Connect these jacks to the corresponding output jacks of a VCR.

When PRESET and AUTO are not lit, the TUNE/PRESET buttons
will allow you to tune to a station manually.

11

10

9

8

7

6

5

4

3

2

1

JSR625 Owners Manual  7/28/98 10:53 AM  Page 4