Read Sony HDR-UX1 / HDR-UX1E (serv.man2) Service Manual online
1-2
HDR-UX1/UX1E_L2
ENGLISH
JAPANESE
ENGLISH
JAPANESE
1-4. SELF-DIAGNOSIS FUNCTION
1-3. USING SERVICE JIG
1. Connect the extension cable (J-6082-572-A) between the DVD mechanism deck and CN4003 on the MD-131 board.
2. Connect the extension cable (J-6082-352-A) between CN4006 on the MD-131 board and CN1005 on the VC-456 board.
3. Connect the extension cable (10P, 0.5 mm) (Note) between CN4015 on the MD-131 board and CN1012 on the VC-456 board.
Note: Cut off the extension cable (18P) (J-6082-393-1) to make the extension cable of 10 pins.
2. Connect the extension cable (J-6082-352-A) between CN4006 on the MD-131 board and CN1005 on the VC-456 board.
3. Connect the extension cable (10P, 0.5 mm) (Note) between CN4015 on the MD-131 board and CN1012 on the VC-456 board.
Note: Cut off the extension cable (18P) (J-6082-393-1) to make the extension cable of 10 pins.
1-4-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
1-4-2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
1 1
3 1
C
Repaired by:
Refer to “1-4-3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
H : Corrected by dealer
E : Corrected by service
engineer
Viewfinder or LCD screen
C : 3 1 : 1 1
DVD mechanism deck
MD-131 board (side A)
VC-456 board (side B)
Flexible board (10P)
Extension cable (10P)
(J-6082-572-A)
Extension cable (100P)
(J-6082-352-A)
Extension cable (10P)
(Note)
CN4003
CN4015
CN1012
CN4006
CN1005
Click on the first or last page to see other HDR-UX1 / HDR-UX1E (serv.man2) service manuals if exist.