Read Sony HDR-HC1 / HDR-HC1E / HDR-HC1EK / HDR-HC1K (serv.man2) Service Manual online
1-1
HDR-HC1/HC1E/HC1K/HC1EK_L2
ENGLISH
JAPANESE
ENGLISH
JAPANESE
1. SERVICE NOTE
1-1. POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so
that the unit cannot operate.
These following method is available to prevent this.
that the unit cannot operate.
These following method is available to prevent this.
Method:
Use the AC power adaptor (AC-L15A/L15B).
1-2. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)
1
Refer to “2. DISASSEMBLY” to remove the mechanism deck block.
2
Supply +4.5V from the DC power supply to the loading motor and unload with a pressing the cassette compartment.
Loading motor
DC power supply
(+ 4.5Vdc)
(+ 4.5Vdc)
1-3. SETTING THE “FORCED POWER ON” MODE
It is possible to turn on power by adjustment remote commander (RM-95).
Operate the VTR function using the adjustment remote commander (RM-95) (with the HOLD switch set in the OFF position).
Operate the VTR function using the adjustment remote commander (RM-95) (with the HOLD switch set in the OFF position).
1-3-1. Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data:01.
2) Select page: A, address: 10, set data:01 and press the “PAUSE” button of the adjustment remote commander.
2) Select page: A, address: 10, set data:01 and press the “PAUSE” button of the adjustment remote commander.
1-3-2. Setting the “Forced VTR Power ON” Mode
1) Select page: 0, address: 01, and set data:01.
2) Select page: A, address: 10, set data:02 and press the “PAUSE” button of the adjustment remote commander.
2) Select page: A, address: 10, set data:02 and press the “PAUSE” button of the adjustment remote commander.
1-3-3. Exiting the “Forced Power ON” Mode
1) Select page: 0, address: 01, and set data:01.
2) Select page: A, address: 10, set data:00 and press the “PAUSE” button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
2) Select page: A, address: 10, set data:00 and press the “PAUSE” button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
Click on the first or last page to see other HDR-HC1 / HDR-HC1E / HDR-HC1EK / HDR-HC1K (serv.man2) service manuals if exist.