Read Sony HDR-CX630V / HDR-PJ630V / HDR-PJ650E / HDR-PJ650V / HDR-PJ650VE / HDR-PJ660 / HDR-PJ660E / HDR-PJ660V / HDR-PJ660VE (serv.man2) Service Manual online
1-10
HDR-CX630V/PJ630V/PJ650E/PJ650V/PJ650VE/PJ660/PJ660E/PJ660V/PJ660VE_L2
(3) Stick the Polyimide Sheet.
While attaching the two bosses, install the Sheet Metal (A), and then
tighten two screws in the order shown in the figure below.
tighten two screws in the order shown in the figure below.
Tightening torque = 0.12 ± 0.01N · m (1.2 ± 0.1kg f · cm)
TO
P
FRONT
2
1
Sheet Metal (A)
Bosses
Polyimide Sheet
Screw
Screw
(4) Stick the adhesive part of the LF-2026 Flexible Board to the Sheet
Metal (D-Sub) while positioning it with the two holes.
If the adhesive force is lowered, cut the Adhesive Sheet as shown
in the figure in the frame and then stick it.
in the figure in the frame and then stick it.
Holes
Shape and sticking position
of the Adhesive Sheet
of the Adhesive Sheet
Adhesive Sheet
Adhesive part
LF-2026 Flexible Board
LF-2026 Flexible Board
Sheet Metal (D-Sub)
(5) Connect the connector of the Flexible Board of the Lens Device
(LSV-1400B).
Install the LF-2026 Flexible Board, Sheet Metal (D-Sub).
TO
P
FRONT
Connector
Flexible Board of the Lens Device (LSV-1400B)
Sheet Metal (D-Sub),
LF-2026 Flexible Board
LF-2026 Flexible Board
(6) While attaching the boss and the claw, install the Front Ornament,
and then tighten three screws in the order shown in the figure below.
Screw (A)
Tightening torque = 0.12 ± 0.01N · m (1.2 ± 0.1kg f · cm)
Screw (B)
Tightening torque = 0.18 ± 0.02N · m (1.8 ± 0.2kg f · cm)
Tightening torque = 0.12 ± 0.01N · m (1.2 ± 0.1kg f · cm)
Screw (B)
Tightening torque = 0.18 ± 0.02N · m (1.8 ± 0.2kg f · cm)
1
2
3
TOP
FR
ONT
Boss
Claw
Screw (B)
Screw (B)
Screw (A)
Front Ornament
– ENGLISH –
(7) Stick the adhesive part of the LF-2026 Flexible Board while position-
ing it with the two bosses.
If the adhesive force is lowered, cut the Adhesive Sheet as shown
in the figure in the frame and then stick it.
in the figure in the frame and then stick it.
TO
P
FRONT
Bosses
Adhesive part
LF-2026 Flexible Board
LF-2026 Flexible Board
Shape and sticking position
of the Adhesive Sheet
of the Adhesive Sheet
Adhesive Sheet
(8) Stick the CM Radiation Sheet.
TOP
FR
ONT
CM Radiation Sheet
(9) Install the Motor A while positioning it with the two bosses, and then
secure it with three screws while turning the Plate of the Motor A.
Tightening torque = 0.18 ± 0.02N · m (1.8 ± 0.2kg f · cm)
TO
P
FR
ON
T
TO
P
FR
ON
T
TO
P
FR
ON
T
TO
P
FR
ON
T
Bosses
Screw
Screw
Screw
Screw
Screw
Screw
Motor A
Plate of the Motor A
Plate of the Motor A
Plate of the Motor A
Click on the first or last page to see other HDR-CX630V / HDR-PJ630V / HDR-PJ650E / HDR-PJ650V / HDR-PJ650VE / HDR-PJ660 / HDR-PJ660E / HDR-PJ660V / HDR-PJ660VE (serv.man2) service manuals if exist.