Read Sony HDR-CX240 / HDR-CX240E / HDR-PJ240 / HDR-PJ240E / HDR-PJ270 / HDR-PJ270E / HDR-PJ275 (serv.man2) Service Manual online
HDR-CX240/CX240E/PJ240/PJ240E/PJ270/PJ270E/PJ275_L2
1-4E
Projector problem checking procedure (indication on brightness)
Yes
No
OK
NG
OK
NG
OK
NG
A
B
Indicated defective
projector received
Measure brightness.
( 2)
Measure brightness.
( 2)
Indication on
brightness
Inspect projector
LED.
( 1)
1 Refer to the ADJUST tab of Adjust Manual.
2 Refer to the SERVICE tab of Adjust Manual.
2 Refer to the SERVICE tab of Adjust Manual.
END
-
-
-
-
-
-
-
Replace projector unit (light emitting block). (*1)
Replace PJ board. (*1)
Replace both projector unit (light emitting block)
and PJ board. (*1)
Replace PJ board. (*1)
Replace both projector unit (light emitting block)
and PJ board. (*1)
Projector Data Input
Fixed value input
Enter the number on the label attached to the unit.
Serial number input
LD40
Enter the number on the label attached to the unit.
Serial number input
LD40
Syywwnnnnn
Enter the red part.
(See page 1-3)
(See page 1-3)
Click on the first or last page to see other HDR-CX240 / HDR-CX240E / HDR-PJ240 / HDR-PJ240E / HDR-PJ270 / HDR-PJ270E / HDR-PJ275 (serv.man2) service manuals if exist.