DCR-TRV410, DCR-TRV410E, DCR-TRV510, DCR-TRV510E - Sony Movie Service Manual (repair manual). Page 127

5-32

Set the level of the VIDEO signal for driving the LCD to the specified
value. If deviated, the screen image will be blackish or saturated
(whitish).

Mode

Camera

Subject

Arbitrary

Measurement Point

Pin !™ of CN910 (EVF VG) on
VC-213 board

Measuring Instrument

Oscilloscope

Adjustment Page

D

Adjustment Address

7B

Specified Value

A=1.95 ± 0.1V (NTSC)
A=1.85 ± 0.1V (PAL)

NTSC model : DCR-TRV410/TRV510
PAL model : DCR-TRV410E/TRV510E

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 3, address: 0C, set data: 60, and press the PAUSE
button of the adjustment remote commander.

3)

Select page: 3, address: 22, set data: 02, and press the PAUSE
button.

4)

Select page: D, address: 7B, change the data and set the voltage
(A) between the pedestal (0 IRE) and 100 IRE to the specified
value.

5)

Press the PAUSE button.

6)

Select page: 3, address: 22, set data: 00, and press the PAUSE
button.

7)

Select page: 3, address: 0C, set data: 00, and press the PAUSE
button.

8)

Select page: 0, address: 01, and set data: 00.

Set the backlight luminance and color temperature.
If deviated, the image may become dark or bright.

Mode

Camera

Subject

Arbitrary

Measurement Point

+ Probe: Pin 0 of CN910
   (EVF BL 4.6V) on VC-213 board
– Probe: Pin 9 of CN910 (EVF BL)
   on VC-213 board

Measuring Instrument

Digital voltmeter

Adjustment Page

D

Adjustment Address

76, 7C

Specified Value

NORMAL mode : A=16 ± 1mVdc
BRIGHT mode : A=26 ± 1mVdc

Adjust 30 seconds after running on the power supply.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: D, address: 7C, change the data and set the voltage
difference (A) between Pin 0 of CN910 (EVF BL 4.6V) and
Pin 9 of CN910 (EVF BL) to the specified value of NORMAL
mode.

3)

Press the PAUSE button.

4)

Select page: D, address: 76, change the data and set the voltage
difference (A) between Pin 0 and Pin 9 to the specified value
of BRIGHT mode..

5)

Press the PAUSE button.

6)

Select page: 0, address: 01, and set data: 00.

Fig. 5-1-15.

A

2H 

100 IRE

Pedestal