Read Sony DCR-TRV410 / DCR-TRV410E / DCR-TRV510 / DCR-TRV510E Service Manual online
DCR-TRV410/TRV410E/
TRV510/TRV510E
RMT-814
US Model
Canadian Model
DCR-TRV510
AEP Model
UK Model
DCR-TRV410E/TRV510E
E Model
Hong Kong Model
Tourist Model
DCR-TRV410/TRV410E
Australian Model
Chinese Model
DCR-TRV410E
MICROFILM
B800 MECHANISM
DIGITAL VIDEO CAMERA RECORDER
Photo: DCR-TRV510
For MECHANISM ADJUSTMENT, refer to
the “8mm Video MECHANICAL
ADJUSTMENT MANUAL ” (9-973-801-11).
the “8mm Video MECHANICAL
ADJUSTMENT MANUAL ” (9-973-801-11).
SPECIFICATIONS
• Abbreviation
HK : Hong Kong model
JE
JE
: Tourist model
AUS : Australian model
CN : Chinese model
CN : Chinese model
NTSC MODEL : DCR-TRV410/TRV510
PAL MODEL
PAL MODEL
: DCR-TRV410E/TRV510E
SERVICE MANUAL
Ver 1.0 1999.03
— 2 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
!
OR DOTTED LINE WITH
MARK
!
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
!
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
Supplied accessories
— 3 —
Model
Destination
Color system
Lens
Digital zoom
CCD imager
LINE REC
RS232C
CD board
DCR-
TRV410
TRV410
E, HK, JE
NTSC
20
×
360
×
720H
®
✕
CD-212
DCR-
TRV410E
TRV410E
AEP, UK
PAL
20
×
80
×
960H
✕
✕
CD-213
E, HK, AUS,
CN, JE
CN, JE
PAL
20
×
360
×
960H
®
✕
CD-213
DCR-
TRV510
TRV510
US, CND
NTSC
20
×
360
×
720H
®
®
CD-212
DCR-
TRV510E
TRV510E
AEP, UK
PAL
20
×
80
×
960H
✕
®
CD-213
Table for differences of function
Remark
NTSC : X251 is 28.6363MHz
PAL : X251 is 28.375MHz
960H: with IC503 of VC-213 board, CD-213 board
720H: CD-212 board
®: with REC button and Q641- 644 of VC-213 board
®: PC-72 board
•
Abbreviation
CND
CND
: Canadian model
HK
: Hong Kong model
AUS
: Australian model
CN
: Chinese model
JE
: Tourist model
— 4 —
TABLE OF CONTENTS
SERVICE NOTE
1.
POWER SUPPLY DURING REPAIRS ····························· 7
2.
TO TAKE OUT A CASSETTE WHEN NOT EJECT
(FORCE EJECT) ································································ 7
(FORCE EJECT) ································································ 7
SELF-DIAGNOSIS FUNCTION
1.
Self-diagnosis Function ······················································ 8
2.
Self-diagnosis Display ························································ 8
3.
Service Mode Display ························································ 8
3-1.
Display Method ·································································· 8
3-2.
Switching of Backup No. ··················································· 8
3-3.
End of Display ···································································· 8
4.
Self-dignosis Code Table ···················································· 9
1.
GENERAL
Checking supplied accessories ·················································· 1-1
Quick Start Guide ······································································ 1-1
Getting Started ··········································································· 1-2
Quick Start Guide ······································································ 1-1
Getting Started ··········································································· 1-2
Using this manual ·································································· 1-2
Step 1 Preparing the power supply ······································· 1-2
Step 1 Preparing the power supply ······································· 1-2
Installing the battery pack ·················································· 1-2
Charging the battery pack ·················································· 1-2
Connecting to the mains ···················································· 1-4
Charging the battery pack ·················································· 1-2
Connecting to the mains ···················································· 1-4
Step 2 Inserting a cassette ···················································· 1-4
Recording – Basics ···································································· 1-5
Recording a picture ································································ 1-5
Shooting backlit subjects (BACK LIGHT) ························ 1-7
Shooting in the dark (NightShot) ······································· 1-7
Shooting in the dark (NightShot) ······································· 1-7
Checking the recording
– END SEARCH/EDITSEARCH/Rec Review ····················· 1-7
– END SEARCH/EDITSEARCH/Rec Review ····················· 1-7
Playback – Basics ······································································ 1-8
Playing back a tape ································································ 1-8
Viewing the recording on TV ················································ 1-9
Viewing the recording on TV ················································ 1-9
Advanced Recording Operations ············································· 1-10
Photo recording ···································································· 1-10
Using the wide mode ··························································· 1-11
Using the fader function ······················································ 1-11
Using special effects – Picture effect ··································· 1-12
Using special effects – Digital effect ··································· 1-12
Using the PROGRAM AE function ····································· 1-13
Adjusting the exposure manually ········································ 1-14
Focusing manually ······························································· 1-14
Inserting a scene ·································································· 1-15
Using the wide mode ··························································· 1-11
Using the fader function ······················································ 1-11
Using special effects – Picture effect ··································· 1-12
Using special effects – Digital effect ··································· 1-12
Using the PROGRAM AE function ····································· 1-13
Adjusting the exposure manually ········································ 1-14
Focusing manually ······························································· 1-14
Inserting a scene ·································································· 1-15
Advanced Playback Operations ··············································· 1-15
Playing back a tape with picture effects ······························ 1-15
Playing back a tape with digital effects ······························· 1-15
Quickly locating a scene using the zero set
memory function ·································································· 1-16
Searching a recording by date ·············································· 1-16
Searching for a photo – Photo search/Photo scan ················ 1-17
Playing back a tape with digital effects ······························· 1-15
Quickly locating a scene using the zero set
memory function ·································································· 1-16
Searching a recording by date ·············································· 1-16
Searching for a photo – Photo search/Photo scan ················ 1-17
Editing on Other Equipment ···················································· 1-17
Dubbing a tape ····································································· 1-17
Flash Memory Operations (DCR-TRV510/TRV510E only)
Using the flash memory function – introduction ················· 1-18
Recording still images in the built-in flash memory
– Memory photo recording ·················································· 1-19
Recording an image from a recorded tape as a still image ·· 1-20
Copying still images from a recorded tape – PHOTO SAVE · 1-21
Viewing a still picture – Memory photo playback ··············· 1-21
Playing back images in a continuous loop – SLIDE SHOW · 1-23
Preventing accidental erasure – PROTECT ························· 1-23
Deleting images – DELETE ················································ 1-23
Recording still images in the built-in flash memory
– Memory photo recording ·················································· 1-19
Recording an image from a recorded tape as a still image ·· 1-20
Copying still images from a recorded tape – PHOTO SAVE · 1-21
Viewing a still picture – Memory photo playback ··············· 1-21
Playing back images in a continuous loop – SLIDE SHOW · 1-23
Preventing accidental erasure – PROTECT ························· 1-23
Deleting images – DELETE ················································ 1-23
Customizing Your Camcorder ················································· 1-24
Changing the MENU settings ·············································· 1-24
Resetting the date and time ·················································· 1-26
Resetting the date and time ·················································· 1-26
Additional Information ···························································· 1-26
Digital8
system, recording and playback ························ 1-26
Changing the lithium battery in your camcorder ················· 1-27
Troubleshooting ··································································· 1-27
Self-diagnosis display ·························································· 1-28
Warning indicators and messages ········································ 1-29
Using your camcorder abroad ·············································· 1-29
Maintenance information and precautions ··························· 1-29
Troubleshooting ··································································· 1-27
Self-diagnosis display ·························································· 1-28
Warning indicators and messages ········································ 1-29
Using your camcorder abroad ·············································· 1-29
Maintenance information and precautions ··························· 1-29
Quick Reference ······································································ 1-30
Identifying the parts and controls ········································ 1-30
Quick Function Guide ························································· 1-33
Quick Function Guide ························································· 1-33
2.
DISASSEMBLY
2-1.
LCD Unit, PD-106 Board ················································ 2-2
2-2.
Front Panel Assembly, Cabinet (R) Assembly ················ 2-3
2-3.
PC-72 Board (TRV510/TRV510E) ································· 2-3
2-4.
MA-356 Board ································································ 2-3
2-5.
Mechanism Deck ····························································· 2-4
2-6.
EVF Block Assembly ······················································ 2-5
2-7.
CF-64 Board ···································································· 2-5
2-8.
VF-126 Board ·································································· 2-6
2-9.
Lens Block ······································································· 2-7
2-10. Mechanism Deck, VC-213, DD-117, PJ-97 Boards ········ 2-8
2-11. Circuit Boards Location ················································ 2-10
2-12. Flexible Boards Location ·············································· 2-11
2-11. Circuit Boards Location ················································ 2-10
2-12. Flexible Boards Location ·············································· 2-11
3.
BLOCK DIAGRAMS
3-1.
Overall Block Diagram (1) ·············································· 3-1
3-2.
Overall Block Diagram (2) ·············································· 3-4
3-3.
Power Block Diagram (1) ················································ 3-7
3-4.
Power Block Diagram (2) ·············································· 3-10
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagram-1 ··········································· 4-1
Frame Schematic Diagram-2 ··········································· 4-5
Frame Schematic Diagram-2 ··········································· 4-5
4-2.
Printed Wiring Boards and Schematic Diagrams ············ 4-9
• CD-212 (CCD Imager)
Printed Wiring Board and
Schematic Diagram ······································· 4-10
Schematic Diagram ······································· 4-10
• CD-213 (CCD Imager)
Printed Wiring Board and
Schematic Diagram ······································· 4-13
Schematic Diagram ······································· 4-13
• VC-213 (Camera Processor)(1/13)
Schematic Diagram ....................................... 4-15
• VC-213 (Y/C Processor)(2/13)
Schematic Diagram ······································· 4-18
• VC-213 (Lens Motor Drive)(3/13)
Schematic Diagram ······································· 4-21
• VC-213 (I/O SEL, IR, BBI)(4/13)
Schematic Diagram ······································· 4-25
• VC-213 (VFD)(5/13)
Schematic Diagram ······································· 4-29
• VC-213 (SFD, TFD, LIP)(6/13)
Schematic Diagram ······································· 4-33
• VC-213 (TRX, TRF, TRW)(7/13)
Schematic Diagram ······································· 4-35
• VC-213 (8mm PB RF AMP, D/A Converter)(8/13)
Schematic Diagram ······································· 4-40
• VC-213 (8mm AFM Processor)(9/13)
Schematic Diagram ······································· 4-43
• VC-213 (8mm Mechanism Control)(10/13)
Schematic Diagram ······································· 4-49
• VC-213 (DV Mechanism Control)(11/13)
Schematic Diagram ······································· 4-51
• FP-249 (S/T Reel Sensor), FP-356 (Top Sensor),
FP-355 (Tape LED) Flexible Board ···························· 4-55
• VC-213 (Servo)(12/13)
Schematic Diagram ······································· 4-56
