Read Sony DCR-TRV410 / DCR-TRV410E / DCR-TRV510 / DCR-TRV510E Service Manual online
5-27
9. Auto White Balance Standard Data Input
Subject
Clear chart
(Color reproduction adjustment frame)
(Color reproduction adjustment frame)
Adjustment Page
F
Adjustment Address
32 to 35
Note 1:
This adjustment should be carried out upon completion of “6. Color
Reproduction Adjustment”.
Reproduction Adjustment”.
Note 2:
Check that the data of page: 6, address: 02 is “00”. If not, select
page: 6, address: 01, set data: 00, and press the PAUSE button of
the adjustment remote commander.
page: 6, address: 01, set data: 00, and press the PAUSE button of
the adjustment remote commander.
Switch setting:
1)
1)
NIGHT SHOT .................................................................. OFF
2)
DIGITAL ZOOM (Menu display) ................................... OFF
3)
STEADY SHOT (Menu display) ..................................... OFF
Adjusting method:
1)
1)
Select page: 0, address: 01, and set data: 01.
2)
Wait for 2 seconds.
3)
Select page: 6, address: 01, set data: 11, and press the PAUSE
button of the adjustment remote commander.
button of the adjustment remote commander.
4)
Select page: 6, address: 01, set data: 0D, and press the PAUSE
button.
(When the standard data is take in, the data will be automatically
input to page: F, address: 32 to 35.)
button.
(When the standard data is take in, the data will be automatically
input to page: F, address: 32 to 35.)
5)
Select page: 6, address: 02, and check that the data is “01”.
6)
Perform “Auto White Balance Adjustment”.
Processing after Completing Adjustments
1)
1)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjustment remote commander.
button of the adjustment remote commander.
2)
Select page: 0, address: 01, and set data: 00.
10. Auto White Balance Adjustment
Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility will
be poor.
If it is not correct, auto white balance and color reproducibility will
be poor.
Subject
Clear chart
(Color reproduction adjustment frame)
(Color reproduction adjustment frame)
Filter
Filter C14 for color temperature
correction
correction
Measurement Point
Display data of page 1 (Note2)
Measuring Instrument
Adjustment remote commander
Adjustment Page
F
Adjustment Address
54, 55
Specified Value
720H model
R ratio: 2BC0 to 2C40
B ratio: 5F40 to 5FC0
B ratio: 5F40 to 5FC0
960H model
R ratio: 2C40 to 2CC0
B ratio: 5D40 to 5DC0
B ratio: 5D40 to 5DC0
Note 1:
Perform “Auto White Balance Standard Data Input” before this
adjustment.
adjustment.
Note 2:
Displayed data of page 1 of the adjustment remote commander.
1 : XX : XX
Display data
Note 3:
720H model:DCR-TRV410/TRV510
960H model: DCR-TRV410E/TRV510E
960H model: DCR-TRV410E/TRV510E
Switch setting:
1)
1)
NIGHT SHOT .................................................................. OFF
2)
DIGITAL ZOOM (Menu display) ................................... OFF
3)
STEADY SHOT (Menu display) ..................................... OFF
Adjusting method:
1)
1)
Place the C14 filter for color temperature correction on the lens.
2)
Select page: 0, address: 01, and set data: 01.
3)
Select page: E, address: 88 to 8B, and note down the data of
each address.
each address.
4)
Input the following data to page: E, addresses:88 to 8B.
Note:
Press the PAUSE button of the adjustment remote commander
each time to set the data.
each time to set the data.
5)
Select page: 6, address: 01, set data: A7, and press the PAUSE button.
6)
Select page: 6, address: 01, set data: A5, and press the PAUSE button.
(The auto white balance adjustment is performed and the
adjustment data is stored in page: F, address: 54 and 55.)
(The auto white balance adjustment is performed and the
adjustment data is stored in page: F, address: 54 and 55.)
7)
Select page: 6, address: 02, and check that the data is “01”.
8)
Select page: 6, address: 01, set data: 3F, and press the PAUSE button.
9)
Select page: 0, address: 03, and set data: 04.
10) Select page: 1, and check that the display data (Note2) satisfies
the R ratio specified value.
11) Select page: 0, address: 03, and set data: 05.
12) Select page: 1, and check that the display data (Note2) satisfies
12) Select page: 1, and check that the display data (Note2) satisfies
the B ratio specified value.
13) Select page: E, address: 88 to 8B, and input the data noted
down at step 3).
Note:
After setting each data, be sure to press the PAUSE button of
the adjustment remote commander.
the adjustment remote commander.
Processing after Completing Adjustments
1)
1)
Select page: 0, address: 01, and set data: 00.
2)
Select page: 0, address: 03, and set data: 00.
3)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
button.
Address
Data
720H model
960H model
88
2C
2C
89
00
80
8A
5F
5D
8B
80
80
Click on the first or last page to see other DCR-TRV410 / DCR-TRV410E / DCR-TRV510 / DCR-TRV510E service manuals if exist.