DCR-TRV410, DCR-TRV410E, DCR-TRV510, DCR-TRV510E - Sony Movie Service Manual (repair manual). Page 115

5-20

Before perform the camera system adjustments, Check that the
specified values of “27/36MHz Origin Oscillation Adjustment”, “S
VIDEO OUT Y level Adjustment” and “S VIDEO OUT C level
Adjustment” of “VIDEO SYSTEM ADJUSTMENT” are satisfied.

For detecting the position of the lens iris, adjust the hall AMP gain
and offset.

Subject

Not required

Measurement Point

Display data of page 1

Measuring Instrument

Adjustment remote commander

Adjustment Page

F

Adjustment Address

47, 48

Specified Value

88 to 8C during IRIS OPEN
15 to 19 during IRIS CLOSE

Displayed data of page 1 of the adjustment remote commander.

1 : 00 : XX

Display data

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 6, address: 01, set data: 6D, and press the PAUSE
button of the adjustment remote commander. (The HALL
adjustment is performed and the adjustment data is stored in
page: F, address: 47 and 48.)

3)

Select page: 6, address: 02, and check that the data is “01”.

4)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

Checking method:
1)

Select page: 0, address: 03, and set data: 03.

2)

Select page: 6, address: 01, set data: 01, and press the PAUSE
button.

3)

Select page: 1, and check that the display data (Note) during
IRIS OPEN satisfies the specified value.

4)

Select page: 6, address: 01, set data: 03, and press the PAUSE
button.

5)

Select page: 1, and check that the display data during IRIS
CLOSE satisfies the specified value.

Processing after Completing Adjustments
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

2)

Select page: 0, address: 01, and set data: 00.

3)

Select page: 0, address: 03, and set data: 00.