DCR-TRV360, DCR-TRV361, DCR-TRV460, DCR-TRV460E, DCR-TRV461E (serv.man4) - Sony Movie Service Manual (repair manual). Page 58

6-55

If reading/writing data on page 18, 1C, set data: 01 to
page: 0, address: 10, and then select page 8, C. By this
data setting, the page 18, 1C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.

After the completion of the all adjustments, cancel the
service mode by either of the following ways.
1) After data on page: A, 18, 1C is restored, press the

RESET button and unplug the main power supply.
(In this case, date and time and menu setting have
been set by users are canceled. Perform resetting)

2) After data on page: A, 18, 1C is restored, select page:

0, address: 01, and return the data to 00. And when
data on page: 7 is changed, return data to the original
condition.

Page 18

Address 12

Data

Function

00

Normal

01

Test mode (Hi8/Standard8 mode)
Various emergency prohibitions and releases
Drum emergency, capstan emergency, loading motor
emergency, reel emergency, tape top and end, DEW
detection

Page 1C

Address 09

Data

Function

FF

Normal

00

Test mode (Digital8 mode)
Various emergency prohibitions and releases
Drum emergency, capstan emergency, loading motor
emergency, reel emergency, tape top and end, DEW
detection

Page A

Address 10

Data

Function

00

Normal

01

Forced camera power ON

02

Forced VTR power ON

03

Forced camera + VTR power ON

05

Forced memory power ON

• Before setting the data , select page: 0, address: 01, and set data:

01.

• For page A, 18, 1C the data set will be recorded in the non-

volatile memory by pressing the PAUSE button of the adjust-
ment remote commander. In this case, take note that the test
mode will not be exited even when the main power is turned off
(8.4 Vdc).

• After completing adjustments/repairs, be sure to return the data

of this address to 00, and press the PAUSE button of the adjust-
ment remote commander. And select page: 0, address: 01, and
set data: 00.

Page C

Address F4 to FF

Address

Contents

F4

EMG code when first error occurs

F6

Upper: MSW code when shift starts when first error

occurs

Lower: MSW code when first error occurs

F7

Lower: MSW code to be moved when first error

occurs

F8

EMG code when second error occurs

FA

Upper: MSW code when shift starts when second

error occurs

Lower: MSW code when second error occurs

FB

Lower: MSW code to be moved when second error

occurs

FC

EMG code when last error occurs

FE

Upper: MSW code when shift starts when last error

occurs

Lower: MSW code when last error occurs

FF

Lower: MSW code to be moved when last error

occurs

When no error occurs in this unit, data “00” is written in the above
addresses (F4 to FF). when first error occurs in the unit, the data
corresponding to the error is written in the first emergency ad-
dress (F4 to F7). In the same way, when the second error occurs,
the data corresponding to the error is written in the second emer-
gency address (F8 to FB).
Finally, when the last error occurs, the data corresponding to the
error is written in the last emergency address (FC to FF).

After completing adjustments, be sure to initialize the data
of addresses F4 to FF to “00”.

Order Page Address Data

Procedure

1

0

01

01

2

3

01

37

Press PAUSE button.

3

3

02

Check the data changes to
“00”.

4

0

01

00