Read Sony DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man4) Service Manual online
DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E
6-57
0001=1
0111=7
0011=3
0010=2
0111=7
0101=5
0111=7
0111=7
0000=0
0111=7
0100=4
0111=7
0110=6
Mechanism position
MODE SW C
MODE SW B
MODE SW A
MSB
←
Unloading
Releasing lock of
cassette campartment
cassette campartment
LS chassis movement range
Pinch roller is pressed
Pinch roller is detached
EJECT
BL
USE
LOAD
BL
REW
BL
BL
REC/PB
BL
TURN
BL
STOP
Loading
→
Contents
Position at which the cassette compartment lock is released. The mechanism will not move
any further in the unloading direction.
any further in the unloading direction.
BLANC code. Between two codes. The mechanism will not be stopped by this code while it
is operating.
is operating.
EJECT completion position. When the cassette is ejected, the mechanism will stop at this
position.
position.
Code during loading/unloading. Code that is used while the LS chassis is moving.
Normal stop position. The pinch roller separates, the tension regulator returns, and the
brakes of both reels turn on.
brakes of both reels turn on.
Position at which is used when the pendulum gear swings from S to T or from T to S.
PB, REC, CUE, REV, PAUSE, FF positions.
The pinch roller is pressed and tension regulator is on.
The pinch roller is pressed and tension regulator is on.
REW position. REW are carried at this position.
The mechanism will not move any further in the loading direction.
The mechanism will not move any further in the loading direction.
Mechanism Position
EJECT
BL
USE
LOAD
STOP
TURN
REC/PB
REW
MSW Code
1
7
3
2
6
4
0
5
2-3. MSW Code
• The lower parts of the data of C page, addresses F6, FA and FE
represent the MSW codes (mode switch mechanism position)
when errors occurs.
when errors occurs.
• The upper parts of the data of C page, addresses F6, FA and FE
represent, when the mechanism position is to be moved, the
MSW codes at the start movement (when moving the loading
motor).
MSW codes at the start movement (when moving the loading
motor).
• The lower parts of the data of C page, addresses F7, FB and FF
represent the MSW codes of the desired movement when the
mechanism position is to be moved.
mechanism position is to be moved.
Click on the first or last page to see other DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man4) service manuals if exist.