Read Sony DCR-TRV15E / DCR-TRV17E (serv.man2) Service Manual online
5-12
1-2-2.
INITIALIZATION OF B PAGE DATA
(DCR-TRV17E)
Note1:
When reading the B page data, insert a “Memory Stick” into the
“Memory Stick” slot.
“Memory Stick” slot.
Note2:
“INITIALIZATION OF B PAGE DATA” should be carried out
upon completion of “INITIALIZATION OF C, D, 8 PAGE DATA”.
upon completion of “INITIALIZATION OF C, D, 8 PAGE DATA”.
Switch setting:
POWER ................................................................. MEMORY
1. Initializing the B Page Data
Note: If the B page data has been initialized, the following
adjustments need to be performed again.
1) Modification of B page data
Adjusting page
B
Adjusting Address
00 to FF
Initializing Method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
2
8F
02
Set the data, and press PAUSE
button.
button.
3
2
8F
03
Set the data, and press PAUSE
button.
button.
4
2
8F
02
Set the data, and press PAUSE
button.
button.
5
2
8F
00
Set the data, and press PAUSE
button.
button.
6
5
0E
00
Set the data.
7
5
01
F3
Set the data, and press PAUSE
button.
button.
8
5
00
01
Set the data, and press PAUSE
button.
button.
9
5
0E
Check that the data changes to “01”.
10
Perform “Modification of B Page
Data”.
Data”.
2. Modification of B Page Data
If the B page data has been initialized, change the data of the “Fixed
data-2” address shown in the following tables by manual input.
data-2” address shown in the following tables by manual input.
Preparations:
Order Page Address Data
Procedure
1
2
8F
02
Set the data, and press PAUSE
button.
button.
2
2
8F
03
Set the data, and press PAUSE
button.
button.
3
2
8F
02
Set the data, and press PAUSE
button.
button.
4
2
8F
00
Set the data, and press PAUSE
button.
button.
Modifying Method:
1)
1)
Before changing the data, select page: 0, address: 01, and set
data: 01.
data: 01.
2)
New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
they are different in destination. When changing the data, copy
the data built in the same model.
Note:
If copy the data built in the different model, the camcorder may
not operate.
not operate.
3)
When changing the data, don’t press the PAUSE
button.
button.
Processing after Completing Modification of B Page data:
Order Page Address Data
Procedure
1
5
0E
00
Set the data, and press PAUSE
button.
button.
2
5
01
FB
Set the data, and press PAUSE
button.
button.
3
5
00
01
Set the data, and press PAUSE
button.
button.
4
5
0E
Check that the data changes to “01”.
(The change data are written in the
flash memory.)
(The change data are written in the
flash memory.)
5
2
00
29
Set the data.
6
2
01
29
Set the data, and press PAUSE
button.
button.
3. B Page Table
Note:
Fixed data-1: Initialized data. (Refer to “1. Initializing the B Page
Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of B Page
Data”.)
Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of B Page
Data”.)
Table. 5-1-5.
Address
Remark
00 to B4
B5
B6 to FF
Fixed data-1
Fixed data-2
Fixed data-1
Click on the first or last page to see other DCR-TRV15E / DCR-TRV17E (serv.man2) service manuals if exist.