Read Sony DCR-TRV15E / DCR-TRV17E (serv.man2) Service Manual online
5-13
1-2-3.
INITIALIZATION OF E, F, 7 PAGE DATA
1. Initializing the E, F, 7 Page Data
Note1: If “Initializing the E, F, 7 Page Data” is performed, all data
of the E page, F page and 7 page will be initialized. (It is
impossible to initialize a single page.)
impossible to initialize a single page.)
Note2:
If the E, F, 7 page data has been initialized, following adjustments
need to be performed again.
1) Modification of E, F, 7 page data
2) Camera system adjustments
3) IR transmitter adjustments
need to be performed again.
1) Modification of E, F, 7 page data
2) Camera system adjustments
3) IR transmitter adjustments
Adjusting page
F
Adjusting Address
10 to FF
Adjusting page
E
Adjusting Address
00 to FF
Adjusting page
7
Adjusting Address
00 to 5F
Switch setting:
POWER .................................................................. CAMERA
Initializing Method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
6
01
2F
Set the data, and press PAUSE
button.
button.
3
6
03
01
Set the data, and press PAUSE
button.
button.
4
6
02
Check that the data changes to “01”.
5
Perform “Modification of E, F, 7
Page Data”.
Page Data”.
2. Modification of E, F, 7 Page Data
If the E, F, 7 page data has been initialized, change the data of the
“Fixed data-2” address shown in the following table by manual input.
“Fixed data-2” address shown in the following table by manual input.
Modifying Method:
1)
1)
Before changing the data, select page: 0, address: 01, and set
data: 01.
data: 01.
2)
New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
they are different in destination. When changing the data, copy
the data built in the same model.
Note:
If copy the data built in the different model, the camcorder may
not operate.
not operate.
3)
When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4)
Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of E, F, 7 Page data
1)
1)
Select page: 0, address: 01, and set data: 00.
2)
Turn off the power and turn on again.
3. F Page Table
Note1:
Fixed data-1: Initialized data. (Refer to “1. Initializing the E, F, 7
Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of E, F, 7
Page Data”.)
Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of E, F, 7
Page Data”.)
Address
Remark
Initial value
00 to 0F
10 to 11
12
13 to 16
17
18
19
1A to 1C
1D
1E
1F
20 to 2F
30
31
32
33
34
35
36
37
38 to 3B
3C
3D
3E to 3F
40
41
42 to 49
4A
4B
4C
4D
4E
4F
50
51
52 to 59
5A
5B
5C
5D
5E
5F
60 to 65
66
67
68
69
6A to 6B
6C
6D
6E
80
81
80
17
9A
80
7A
90
3E
43
59
22
24
00
EF
80
40
51
19
22
20
93
13
00
00
46
00
19
00
2A
00
7C
74
00
80
Fixed data-1
36MHz origin osc adj.
Fixed data-1
HALL adj.
Fixed data-1
MAX GAIN adj.
AWB & LV standard data input
Fixed data-1
AWB & LV standard data input
Fixed data-1
Color reproduction adj.
Fixed data-1
Color reproduction adj.
Fixed data-1
Color reproduction adj.
Fixed data-1
Auto white balance adj.
Fixed data-1
Flange back adj.
Fixed data-1
Flange back adj.
Fixed data-1
Angular velocity sensor sensitivity
adj.
Fixed data-1
Optical axis adj.
Fixed data-1
Fixed data-2
IR video carrier frequency adj.
Click on the first or last page to see other DCR-TRV15E / DCR-TRV17E (serv.man2) service manuals if exist.