Read Panasonic CQ-C1001W1 Service Manual online
General
Power Supply
DC 12V (11V - 16V),
Test Voltage 14.4V
Negative Ground
Tone Controls
Bass ; ±12dB at 100Hz
Treble ; ±12dB at 10kHz
Current Consumption
Less than 2.2A (CD play mode,
0.5W×4ch)
0.5W×4ch)
Maximum Power Output
50W×4ch (at 1kHz, Vol. Max.)
Suitable Speaker Impedance
4-8
Ω
Pre-Amp Output Voltage
2.5V (CD play mode; 1kHz, 0dB)
Output Impedance
200
Ω
FM Stereo Radio
Frequency Range
87.5 - 108MHz
Usable Sensitivity
11.0dBf (1.25µV, 75
Ω
)
AM Radio
CQ-C1001W1
Removable Front Panel CD Player /
Receiver
Receiver
Frequency Range
531 - 1,602kHz
Usable Sensitivity
28dB/µV (25µV, S/N 20dB)
CD Player
Sampling Frequency
8 times oversampling
Pick-Up Type
Astigma 3-beam
Light Source
Semiconductor Laser
Wavelength
780nm
Frequency Response
20Hz to 20,000Hz (±1dB)
Signal to Noise Ratio
96dB
Dimensions**
178×50×155mm
Weight**
1.4kg
* Specifications and the design are subject to possible modification
without notice due to improvements.
without notice due to improvements.
** Dimensions and Weight shown are approximate.
AUTOMOTIVE AFTERMARKET
Specification*
Order No. ACED050523C3
1
ABOUT LEAD FREE SOLDER (PbF)
2
2
FEATUERS
2
3
LASER PRODUCTS
2
4
REPLACEING THE FUSE
2
5
MAINTENANCE
3
6
NOTES
3
7
DIMENSIONS
3
8
WIRING CONNECTION
4
9
BLOCK DIAGRAM
5
10 TERMINALS DESCRIPTION
6
1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
stamp on the PCB.
Caution :
•
•
•
•
Pb free solder has a higher melting point than standard
solder; Typically the melting point is 50 - 70°F (30 -
40°C)
solder; Typically the melting point is 50 - 70°F (30 -
40°C)
higher.
Please
use
a
soldering
iron
with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
•
•
•
•
Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
(about 1100°F/600°C)
•
•
•
•
This lead free solder will be used for the products after
serial No. 1,000,001.
serial No. 1,000,001.
2 FEATUERS
•
•
•
•
18-FM, 6-AM presets with preset scan
•
•
•
•
Digital servo for reliable CD playback.
•
•
•
•
Removable face plate.
11 PACKAGE AND IC BLOCK DIAGRAM
8
12 REPLACEMENT PARTS LIST
12
13 EXPLODED VIEW (Unit)
16
14 CD PLAYER MECHANICAL PARTS LIST
17
15 EXPLODED VIEW (CD Deck)
18
16 WIRING DIAGRAM
19
17 SCHEMATIC DIAGRAM-1
23
18 SCHEMATIC DIAGRAM-2
25
19 SCHEMATIC DIAGRAM for printing with A4 size
27
3 LASER PRODUCTS
4 REPLACEING THE FUSE
Use fuses of the same specified rating (15A). Using different
substitutes or fuses with higher ratings, or connecting the
product directly without a fuse, could cause fire or damage to
the stereo unit.
substitutes or fuses with higher ratings, or connecting the
product directly without a fuse, could cause fire or damage to
the stereo unit.
CONTENTS
Page
Page
2
CQ-C1001W1
5 MAINTENANCE
Your products is designed and manufactured to ensure a
minimum of maintenance. Use a dry, a soft cloth for routine
exterior cleaning. Never use benzine, thinner or other solvents.
minimum of maintenance. Use a dry, a soft cloth for routine
exterior cleaning. Never use benzine, thinner or other solvents.
6 NOTES
[RADIO BLOCK]
Do not align the AM/FM package block. When the package
block is necessary, it will be supplied already aligned at the
factory.
block is necessary, it will be supplied already aligned at the
factory.
[CD DECK BLOCK]
This
model
has
no
servo
alignment
points
because
microcomputer controls the servo circuit.
7 DIMENSIONS
3
CQ-C1001W1
8 WIRING CONNECTION
4
CQ-C1001W1