DCR-SR35E, DCR-SR36E, DCR-SR45, DCR-SR45E, DCR-SR46, DCR-SR46E, DCR-SR55E, DCR-SR65, DCR-SR65E, DCR-SR75E, DCR-SR85, DCR-SR85E (serv.man4) - Sony Movie Service Manual (repair manual). Page 11

Read Sony DCR-SR35E / DCR-SR36E / DCR-SR45 / DCR-SR45E / DCR-SR46 / DCR-SR46E / DCR-SR55E / DCR-SR65 / DCR-SR65E / DCR-SR75E / DCR-SR85 / DCR-SR85E (serv.man4) Service Manual online

6-10
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
Note:
During the execution of Factory Check, the LCD screen of
the camcorder becomes gray, and the ACCESS lamp be-
comes dark and light.
When the Factory Check finished, the LCD screen changes
as follows:
When Factory Check is OK: Camera image display
When Factory Check is NG: Blue display
Is replacement HDD new one?
No
Reused HDD
Yes
New HDD
Turn off the power of camcorder.
Turning on the power of camcorder 
will start automatic Factory Check.
Wait until Factory Check completed. (Note)
[EST. PROCESS TIME]
Default: 6 min.
Full:
            30GB  About 1 hour  52 min.
            40GB  About 2 hour  36 min.
            60GB  About 3 hour  36 min.
Replace the HDD.
Execte the 
“SetFactoryCheckDefault_After2008.vbe”.
(Double-click the file.)
Wait until “JOB Success” 
message is displayed. 
(several seconds)
Wait until “JOB Success” 
message is displayed. 
(several seconds)
Wait until “JOB Success” 
message is displayed. 
(several seconds)
Execte the 
“SetFactoryCheckFull_After2008.vbe”.
(Double-click the file.)
Execte the 
“ExecAfterFactoryCheck_2008.vbe”.
(Double-click the file.)
B
A
(See page 6-9)
(See page 6-9)
Page of 48
Display

Click on the first or last page to see other DCR-SR35E / DCR-SR36E / DCR-SR45 / DCR-SR45E / DCR-SR46 / DCR-SR46E / DCR-SR55E / DCR-SR65 / DCR-SR65E / DCR-SR75E / DCR-SR85 / DCR-SR85E (serv.man4) service manuals if exist.