Read Sony DCR-SR35E / DCR-SR36E / DCR-SR45 / DCR-SR45E / DCR-SR46 / DCR-SR46E / DCR-SR55E / DCR-SR65 / DCR-SR65E / DCR-SR75E / DCR-SR85 / DCR-SR85E (serv.man4) Service Manual online
SECTION 6
ADJUSTMENTS
Revision History
Revision History
Sony EMCS Co.
Auto-ADJ
Ver. 1.4 2008.08
9-852-242-55
2008H0500-1
© 2008.8
Published by Kohda TEC
RMT-835
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E
Link
Link
VIDEO SYSTEM ADJUSTMENTS
USB SERIAL No. INPUT
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
DESTINATION DATA WRITE
HDD SYSTEM ADJUSTMENTS
ADJUSTMENT PROGRAM
LCD SYSTEM ADJUSTENTS
ERROR
CAMERA SYSTEM ADJUSTMENTS
(Non MEGA model)
(Non MEGA model)
CAMERA SYSTEM ADJUSTMENTS
(MEGA model)
(MEGA model)
APPLICATION FOR ADJUSTMENT (SeusEX)
SERVICE MODE
DATA BACKUP
SERVICE MODE
Adjusting items when replacing main parts and boards
(Non MEGA model)
(Non MEGA model)
Adjusting items when replacing main parts and boards
(MEGA model)
(MEGA model)
Before starting adjustments
List of service tools
• Use this Service Manual together with the Automatic Adjustment Program (DCR-SR45 Series Auto-Adj
Ver_1.4r05.exe or DCR-SR65 Series Auto-Adj Ver_1.4r05.exe).
Non MEGA model: DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E
• Automatic Adjustment Program: DCR-SR45 Series Auto-Adj Ver_1.4r05.exe
MEGA model: DCR-SR55E/SR65/SR65E/SR75E/SR85/SR85E
• Automatic Adjustment Program: DCR-SR65 Series Auto-Adj Ver_1.4r05.exe
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
6-1
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
6. ADJUSTMENTS
Table 6-1-1
Before starting adjustments
1-1. Adjusting items when replacing main parts and boards (Non MEGA model)
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The Automatic Adjustment Program does not support.
Note 2:
When replacing the HDD block, refer to “HDD Replacement Procedure”. (See page 6-9)
Note 3:
IC2101 (Flash memory) on the VC-518 board cannot be replaced.
Lens device
HDD block (Note 2)
LCD block LCD901 (LCD panel)
CD-720 board IC7101 (CCD imager )
VC-518 board IC1701, X1701 (CPU, Oscillator)
VC-518 board IC1201 (A/D converter, Timing generator)
VC-518 board IC2401 (D/A converter)
VC-518 board IC2901 (Video OUT, Audio I/O)
PD-346 board D6205 - 6207 (LCD backlight)
PD-346 board IC6201 (LCD driver)
CD-720 board (COMPLETE)
PD-346 board (COMPLETE)
VC-518 board (COMPLETE)
Destination
Data Set
Data Set
Destination data set
z
USB Serial No.
Input
Input
USB serial No. input
z
(Note 1)
Origin oscillation check
z
z
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
VIDEO OUT level check
S VIDEO OUT chroma level adj.
VIDEO OUT level check
CAMERA
adjustment 1
adjustment 1
HALL adj.
z
z
CAMERA
adjustment 2
adjustment 2
Flange back adj.
z
z
z
z
z
CAMERA
adjustment 3
adjustment 3
Flange back check
z
z
z
z
z
F No. standard data input
MAX GAIN adj.
Color reproduction adj.
Color reproduction check
AWB & LV standard data input
AWB adj.
AWB check
MAX GAIN adj.
Color reproduction adj.
Color reproduction check
AWB & LV standard data input
AWB adj.
AWB check
CAMERA
adjustment 6
adjustment 6
Black Defect adj.
z
z
z
LCD automatic adj. (VCO adj, Contrast adj.)
V-COM adj.
V-COM adj.
Transmissive moed white balance adj.
replacement
Board
z
z
VIDEO
adjustment
adjustment
Replaced parts
Adjusting item
Adjustment
Parts replacement
Block replacement
z
Touch panel adj.
z
Touch panel
adjustment
adjustment
z
z
CAMERA
adjustment 4
adjustment 4
LCD
adjustment
adjustment
CAMERA
adjustment 5
adjustment 5
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
6-2
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
Lens device
HDD block (Note 2)
LCD block LCD901 (LCD panel)
CD-672/687 board IC7002 (CCD imager ) (Note 3)
CD-672/687 board SE7001, 7002 (YAW, PITCH sensor) (Note 3)
VC-518 board IC1701, X1701 (CPU, Oscillator)
VC-518 board IC1201 (A/D converter, Timing generator)
VC-518 board IC2401 (D/A converter)
VC-518 board IC2901 (Video OUT, Audio I/O)
PD-346 board D6205 - 6207 (LCD backlight)
PD-346 board IC6201 (LCD driver)
CD-672/687 board (COMPLETE) (Note 3)
PD-346 board (COMPLETE)
VC-518 board (COMPLETE)
Destination
Data Set
Data Set
Destination data set
z
USB Serial No.
Input
Input
USB serial No. input
z
(Note 1)
Origin oscillation check
z
z
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
VIDEO OUT level check
S VIDEO OUT chroma level adj.
VIDEO OUT level check
CAMERA
adjustment 1
adjustment 1
HALL adj.
z
z
CAMERA
adjustment 2
adjustment 2
Flange back adj.
z
z
z
z
z
CAMERA
adjustment 3
adjustment 3
Flange back check
z
z
z
z
z
F No. standard data input
MAX GAIN adj.
Mechanical shutter adj
Color reproduction adj.
Color reproduction check
AWB & LV standard data input
AWB adj.
AWB check
MAX GAIN adj.
Mechanical shutter adj
Color reproduction adj.
Color reproduction check
AWB & LV standard data input
AWB adj.
AWB check
CAMERA
adjustment 6
adjustment 6
Black Defect adj.
z
z
z
CAMERA
adjustment 7
adjustment 7
Steady shot check
z
z
z
LCD automatic adj. (VCO adj, Contrast adj.)
V-COM adj.
V-COM adj.
Transmissive moed white balance adj.
Reflective mode white balance adj.
Reflective mode white balance adj.
z
Adjusting item
Adjustment
Board
replacement
Replaced parts
Parts replacement
Block replacement
z
z
z
z
z
z
z
z
Touch panel
adjustment
adjustment
VIDEO
adjustment
adjustment
z
LCD
adjustment
adjustment
CAMERA
adjustment 4
adjustment 4
CAMERA
adjustment 5
adjustment 5
Touch panel adj.
z
z
z
z
z
z
z
z
z
z
z
Table 6-1-2
1-2. Adjusting items when replacing main parts and boards (MEGA model)
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The Automatic Adjustment Program does not support.
Note 2:
When replacing the HDD block, refer to “HDD Replacement Procedure”. (See page 6-9)
Note 3:
CD-672 complete board is supplied instead of CD-687 complete board, because CD-672 complete board and CD-687 complete
board are compatible.
board are compatible.
Note 4:
IC2101 (Flash memory) on the VC-518 board cannot be replaced.
6-3
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
1-3. List of service tools
• Oscilloscope
• Color monitor
• Frequency counter
Fig. 6-1-1
Note 1:
Personal computer
OS:
OS:
Windows 2000/XP Home/XP Pro
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
Personal computer
(Note 1)
(Note 1)
J-1
HASP key and application
for adjustment (SeusEX)
for adjustment (SeusEX)
Contact our service headquarters of each
area how to get the application for
adjustment (SeusEX) and HASP key.
area how to get the application for
adjustment (SeusEX) and HASP key.
J-2
USB cable
1-829-579-41
1-829-579-41
J-3
J-10
J-6
J-4
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-7
Color bar chart
For PTB-450:
J-6020-250-A
J-6020-250-A
For PTB-1450:
J-6082-559-A
J-6082-559-A
J-8
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-9
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Filter for color
temperature correction
(C14)
J-6080-058-A
temperature correction
(C14)
J-6080-058-A
J-11
ND filter 1.0
J-6080-808-A
J-6080-808-A
ND filter 0.4
J-6080-806-A
J-6080-806-A
ND filter 0.1
J-6080-807-A
J-6080-807-A
J-5
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
J-13
Camera table
J-6082-384-A
J-6082-384-A
J-12
Background paper
J-2501-130-A
J-2501-130-A
AC adaptor
AC-L200/L200B
1-479-285-21
AC-L200/L200B
1-479-285-21
J-14
