Read Sony DCR-PC7 / DCR-PC7E Service Manual online
5-7
REF. No.
Part No.
Description
Remark
REF. No.
Part No.
Description
Remark
801
3-315-414-31 WASHER
802
X-3748-623-1 GL (S) ASSY
803
3-748-600-02 RAIL (S)
804
3-703-816-42 SCREW (M1.4x2.5), SPECIAL HEAD
805
X-3748-622-2 COASTER (S) ASSY
806
X-3945-435-1 SHAFT (12) ASSY, WORM
807
1-657-756-11 FP-347 FLEXIBLE BOARD
808
3-748-742-02 SPRING, TORSION
809
3-966-107-01 SPRING, COMPRESSION
810
3-966-105-01 FLANGE, TG1 LOWER
811
3-966-100-01 SLEEVE, TG1/3
812
3-966-099-01 ROLLER, TG1/3
813
3-966-102-01 FLANGE, TG1/3 UPPER
814
3-966-101-01 NUT, TG1/3
815
3-966-099-11 ROLLER, TG1/3
816
3-966-100-11 SLEEVE, TG1/3
817
3-966-106-01 FLANGE, TG3 LOWER
818
X-3748-629-3 ARM ASSY, HC
819
3-728-103-01 SCREW (M1.4X1.6)
820
3-727-843-16 SPACER, HEAD (CORRECTIVE SPACER)
(t=50um)
821
X-3748-624-1 GL (T) ASSY
822
3-748-601-02 RAIL (T)
823
3-964-430-01 SPRING, LS RETAINER
824
X-3748-628-2 SLIDE ASSY, HC
825
A-7026-006-A ROLLER ASSY, HC
826
A-7026-003-A COASTER (T) BLOCK ASSY
827
X-3748-626-3 TG5 ASSY
828
3-965-211-01 SCREW (M1)
829
X-3946-602-1 COASTER (T) ASSY (-M)
830
3-973-948-01 FLANGE (2), TG1/3 UPPER
M902
8-835-524-01 MOTOR, DC SCD-0101A (CAPSTAN)
M903
A-7026-007-A MOTOR ASSY, LM (LOADING)
827
826
829
804
801
825
824
801
814
807
814
802
813
812
811
810
809
806
830
815
816
817
809
808
804
804
805
801
804
803
821
Note
820
828
822
823
801
819
818
not supplied
not supplied
M903
M902
5-1-7. MECHANISM CHASSIS ASSEMBLY (1)
Note : Be sure to remember the installed position (one of two positions), direction and thickness of the Ref. No. 820
(head spacer) when the M902 (capstan motor) is removed. Refer to “3-9. Capstan motor” on page 15 in the DV
MECHANICAL ADJUSTMENT MANUAL
MECHANICAL ADJUSTMENT MANUAL
I
(9-973-815-11) for details. The thickness of head spacer is normally
100
µ
m. If it is lost, two 50
µ
m head spacers will be needed. Be careful not to loose it.
Click on the first or last page to see other DCR-PC7 / DCR-PC7E service manuals if exist.