Read Sony DCR-HC85 / DCR-HC85E (serv.man4) Service Manual online
6-26
DCR-HC85/HC85E
4. CCD Output 2ch Matching Adjustment (1)
Correct the dispersion of the black level between the left-right
channels of the CCD imager.
channels of the CCD imager.
Subject
Arbitrary
Adjustment Page
F
19 (Note3)
Adjustment Address
24 to 27
20 to 23, 2A to 2D
Note1:
This adjustment should be carried out upon completion of the
following adjustments.
following adjustments.
“HALL Adjustment”
Note2:
After this adjustment, perform the following adjustments.
“CCD Output 2ch Matching Adjustment (2)”, “Flange Back
Adjustment”, “Color Reproduction Adjustment”
Adjustment”, “Color Reproduction Adjustment”
Note3:
When reading or writing the 19 page data, select page: 0, address:
10, and set data: 01, then select 9 page. The 19 page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
10, and set data: 01, then select 9 page. The 19 page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
Note4:
Check that the data of page: 6, address: 02 is “00”. If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
6, address: 01, set data: 00, and press the PAUSE button.
Switch setting:
1)
1)
MODE ......................................................... CAMERA-TAPE
2)
NIGHT SHOT .................................................................. OFF
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
0
10
00
Set the data.
3
6
01
F3
Set the data, and press PAUSE
button.
button.
4
6
02
Check that the data changes to
“01”. (Note4)
“01”. (Note4)
Note5:
The adjustment data will be automatically input to page: F, address:
24 to 27 and to page: 19, address: 20 to 23, 2A to 2D.
24 to 27 and to page: 19, address: 20 to 23, 2A to 2D.
Processing after Completing Adjustments
Order Page Address Data
Procedure
1
0
10
00
Set the data.
2
6
01
00
Set the data, and press PAUSE
button.
button.
3
Perform “CCD Output 2ch
Matching Adjustment (2)”.
Matching Adjustment (2)”.
5. CCD Output 2ch Matching Adjustment (2)
Correct the dispersion between the left-right channels of the CCD
imager.
imager.
Subject
Clear chart (All white) (Note1)
Adjustment Page
19 (Note2)
Adjustment Address
2E to 3F
Note1:
Shoot the clear chart with the zoom TELE end.
Note2:
This adjustment should be carried out upon completion of the
following adjustments.
following adjustments.
CCD Output 2ch Matching adjustment (1)
Note3:
When reading or writing the 19 page data, select page: 0, address:
10, and set data: 01, then select 9 page. The 19 page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
10, and set data: 01, then select 9 page. The 19 page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
Note4:
Check that the data of page: 6, address: 02 is “00”. If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
6, address: 01, set data: 00, and press the PAUSE button.
Switch setting:
1)
1)
MODE ......................................................... CAMERA-TAPE
2)
NIGHT SHOT .................................................................. OFF
3)
ZOOM .................................................................... TELE end
4)
FOCUS .................................................................. MANUAL
5)
STEADY SHOT (CAMERA SET menu) ........................ OFF
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
0
10
00
Set the data.
3
6
01
F5
Set the data, and press PAUSE
button.
button.
4
6
02
Check that the data changes to
“01” in about 30 seconds after
pressing PAUSE button.
“01” in about 30 seconds after
pressing PAUSE button.
Note4:
The adjustment data will be automatically input to page: 19,
address: 2E to 3F
address: 2E to 3F
Processing after Completing Adjustments
Order Page Address Data
Procedure
1
0
10
00
Set the data.
2
6
01
00
Set the data, and press PAUSE
button.
button.
3
0
01
00
Set the data.
Click on the first or last page to see other DCR-HC85 / DCR-HC85E (serv.man4) service manuals if exist.