Read Sony DCR-HC51E / DCR-HC52 / DCR-HC52E / DCR-HC53E / DCR-HC54 / DCR-HC54E (serv.man4) Service Manual online
6-44
DCR-HC51E/HC52/HC52E/HC53E/HC54/HC54E_ADJ
3.
VIDEO OUT Level Check (VC-537 board)
Mode
CAMERA
Subject
Arbitrary
Measurement Point
Video terminal of A/V OUT jack (75
Ω terminated)
Ω terminated)
Measuring Instrument
Oscilloscope
Specified value
Sync level: A = 286
± 18 mVp-p (NTSC)
A = 300
± 18 mVp-p (PAL)
Burst level: B = 286
± 18 mVp-p (NTSC)
B = 300
± 18 mVp-p (PAL)
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: NTSC model: DCR-HC52/HC54
Note 2: NTSC model: DCR-HC52/HC54
PAL model: DCR-HC51E/HC52E/HC53E/HC54E
Switch setting:
1) DEMO MODE (Menu setting) ........................................ OFF
1) DEMO MODE (Menu setting) ........................................ OFF
Checking method:
Order Page Address Data
Procedure
1
3
0C
02
Press PAUSE (Write) button.
2
Check the sync signal level
(A) to the specified value.
(A) to the specified value.
3
Check the burst signal level
(B) to the specified value.
(B) to the specified value.
4
3
0C
00
Press PAUSE (Write) button.
Fig. 6-3-5
H
B
A
Click on the first or last page to see other DCR-HC51E / DCR-HC52 / DCR-HC52E / DCR-HC53E / DCR-HC54 / DCR-HC54E (serv.man4) service manuals if exist.