DCR-DVD408 (serv.man3) - Sony Movie Service Manual (repair manual). Page 18

6-15

DCR-DVD408_ADJ

4) After that, the following screen is displayed during the execu-

tion of “3. S VIDEO OUT Chroma Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Cr signal level
and the Cb signal level satisfies the specified value. After the
adjustment, check that the burst level of the chroma signals
satisfies the specified value, and click the [End] button in the
screen.

5) If the [End] button is clicked, “4. VIDEO OUT Level Check”

will be executed. The following message and screen are dis-
played. Check that the sync signal level and burst level of the
video signals satisfies the specified value, and click the [OK]
button in the message.

6) If the [OK] button is clicked, “5. Release of Data Setting dur-

ing Video Adj.” will be executed.

7) Upon successful completion of all item the VIDEO Adjust-

ment, the following message is displayed. Click the [OK] but-
ton.