Read Sony DCR-DVD408 (serv.man3) Service Manual online
6-10
DCR-DVD408_ADJ
1-3.
DESTINATION DATA WRITE
Note: The DESTINATION DATA WRITE can be set with the
Service board only.
Performing the DESTINATION DATA WRITE with other
than the Service board causes the error (E:20:00 will be
blinking) and the power to be shut down.
Performing the DESTINATION DATA WRITE with other
than the Service board causes the error (E:20:00 will be
blinking) and the power to be shut down.
1.
Function of Each Button on Destination Data Write
Screen
Click the [DESTINATION DATA WRITE] button on the Main
Menu screen, and the “DESTNATION DATA WRITE” screen
in Fig. 6-1-10 will appear.
Screen
Click the [DESTINATION DATA WRITE] button on the Main
Menu screen, and the “DESTNATION DATA WRITE” screen
in Fig. 6-1-10 will appear.
Fig. 6-1-10
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
Model Name List
Selects the model name.
Selects the model name.
3
Destination List
Selects the written destination.
Selects the written destination.
4
[Data Write] button
Write the destination data to the camcorder.
Write the destination data to the camcorder.
2.
Destination Data Write
[Writing method]
1) Select the model name with the Model Name List.
1) Select the model name with the Model Name List.
2) Select the written destination with the Destination List.
3) Click the [Data Write] button.
4) The writing finishes when the following message is displayed.
1
2
3
4
Click on the first or last page to see other DCR-DVD408 (serv.man3) service manuals if exist.