DCR-DVD408 (serv.man3) - Sony Movie Service Manual (repair manual). Page 17

6-14

DCR-DVD408_ADJ

R1216

IC1201

VC-478 BOARD (SIDE A)

Check the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color
will become inconsistent.

Subject

Not required

Measurement Point

R1216 (Pin K5 of IC1201 (CHCK))
on VC-478 board

Measuring Instrument

Frequency counter

Specified value

f = 40459541 

±

 809 Hz (4M NTSC)

f = 44505494 

±

 890 Hz (6M NTSC)

f = 31185000 

±

 624 Hz (4M PAL)

f = 37125000 

±

 743 Hz (6M PAL)

Note: 4M NTSC model: DCR-DVD408/DVD808

6M NTSC model: DCR-DVD508/DVD908
4M PAL model: DCR-DVD406E/DVD408E/DVD808E
6M PAL model: DCR-DVD506E/DVD508E/DVD908E

Switch setting
1) POWER ............................................................. MOVIE mode

Checking method:
1) Check that the frequency (f) satisfies the specified value.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. S VIDEO OUT Y Level Adj.
3. S VIDEO OUT Chroma Level Adj.
4. VIDEO OUT Level Check
5. Release of Data Setting during Video Adj.

[Adjusting method]
1) Click the [Start] button of the VIDEO Adjustment.
2) The Automatic Adjustment Program executes the “1. Data

Setting during Video Adj.”.

3) If “1. Data Setting during Video Adj.” completed successfully,

the following screen is displayed during the execution of “2. S
VIDEO OUT Y Level Adj.”. Using the [Up]/[Down] button on
the screen, adjust so that the Y signal level satisfies the speci-
fied value. After the adjustment, click the [End] button in the
screen.