Read Sony DCR-DVD103 / DCR-DVD602 / DCR-DVD602E / DCR-DVD653 / DCR-DVD653E / DCR-DVD92 / DCR-DVD92E (serv.man4) Service Manual online
6-19
DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E
1-4.
VIDEO SYSTEM ADJUSTMENTS
1.
Function of Each Button on Video System
Adjustment Screen
Adjustment Screen
Click the
[VIDEO SYSTEM ADJUSTMENT]
button on the Main
Menu screen, and the “VIDEO SYSTEM ADJUSTMENT” screen
in Fig. 6-1-8 will appear.
in Fig. 6-1-8 will appear.
Fig. 6-1-8
1
[To Menu]
button
The Main Menu screen comes back.
2
[Preparation]
button
Notes for adjustment or jigs used are displayed.
3
[Start]
button
“Video Adjustment” starts.
4
[Release Data Setting]
button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
2.
Adjustment Items of VIDEO System Adjustment
The adjustment items of video system adjustment are as listed in
Table 6-1-2. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
Table 6-1-2. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
4
3
2
1
Button
Name
Adjustment
Measurement Point
Measuring
Instrument
Adjustment
Page
Adjustment
Address
(Note)
36 MHz Origin
Oscillation Adj.
Oscillation Adj.
Frequency
counter
counter
0F
10
S VIDEO OUT Y
Level Adj.
Level Adj.
Y signal terminal of S VIDEO plug of
A/V jack (75 ohm terminated)
A/V jack (75 ohm terminated)
R2150 (Pin <zc. of IC2101 (SPCK)) on
VC-395 board
VC-395 board
Oscilloscope
0C
25
S VIDEO OUT
Chroma Level Adj.
Chroma Level Adj.
Chroma signal terminal of S VIDEO
plug of A/V jack (75 ohm terminated)
plug of A/V jack (75 ohm terminated)
Oscilloscope
0C
26, 27
–
–
VIDEO OUT Level
Check
Check
VIDEO terminal of A/V jack (75 ohm
terminated)
terminated)
Oscilloscope
VIDEO
Adjustment
Adjustment
Note:
The Automatic Adjustment Program does not support.
Table 6-1-2
Click on the first or last page to see other DCR-DVD103 / DCR-DVD602 / DCR-DVD602E / DCR-DVD653 / DCR-DVD653E / DCR-DVD92 / DCR-DVD92E (serv.man4) service manuals if exist.