Read Sony DCR-DVD103 / DCR-DVD602 / DCR-DVD602E / DCR-DVD653 / DCR-DVD653E / DCR-DVD92 / DCR-DVD92E (serv.man4) Service Manual online
6-15
DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E
1-2-3.
Initialization of C, 1C Page Data
1.
Initializing of C, 1C Page Data
Note 1:
If “Initialization of Pages C, 1C” is executed, all data on
pages C, 1C are initialized. (Only an individual page can-
not be initialized)
pages C, 1C are initialized. (Only an individual page can-
not be initialized)
Note 2:
If the C, 1C page data has been initialized, the following
adjustments need to be performed again.
1) Modification of C, 1C page data
2) Input of board type data
3) “VIDEO Adjustment” of the video system adjustment
4) LCD/EVF system adjustments
adjustments need to be performed again.
1) Modification of C, 1C page data
2) Input of board type data
3) “VIDEO Adjustment” of the video system adjustment
4) LCD/EVF system adjustments
Adjustment Page
C
Adjustment Address
10 to FF
Adjustment Page
1C
Adjustment Address
00 to FF
Initializing method:
Order Page Address Data
Procedure
1
0
01
01
2
0
10
00
3
3
80
0F
Press PAUSE button.
Check the data changes to
4
3
80
“1F”.
5
Perform “Modification of C,
1C Page Data”
1C Page Data”
Note 3:
If other than adjustment address was initialized, the ad-
justed data is not initialized.
justed data is not initialized.
2.
Modification of C, 1C Page Data
If the C, 1C page data has been initialized, change the data of the
“Fixed data-2” address shown in the following table by manual
input.
“Fixed data-2” address shown in the following table by manual
input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) If modification of data on pages C, set data: 00 to page: 0,
address: 10, and then select pages C.
3) If modification of data on pages 1C, set data: 01 to page: 0,
address: 10, and then select pages C.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
4) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
the data built in the same model.
Note 1:
If copy the data built in the different model, the
camcorder may not operate.
camcorder may not operate.
5) When changing the data, press the PAUSE button of the ad-
justment remote commander each time when setting new data
to write the data in the non-volatile memory.
to write the data in the non-volatile memory.
6) Check that the data at the addresses for adjustment are initial
values (adjustment initial values) listed in the table.
If different, change them to the adjustment initial values.
If different, change them to the adjustment initial values.
Processing after Completing Modification C, 1C page data:
Order Page Address Data
Procedure
1
0
10
00
2
2
00
29
3
2
01
29
Press PAUSE button.
Note 2:
This operation should be done with the adjustment re-
mote commander. The operation of page: 02 cannot be
performed with the SeusCam.
mote commander. The operation of page: 02 cannot be
performed with the SeusCam.
3.
Input of Board Type Data
Write the board type data in the EEPROM (nonvolatile memory).
Page
1C
Address
72, 73
Input method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 01.
3) Input the following data to page: C, addresses: 72 and 73
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 01.
3) Input the following data to page: C, addresses: 72 and 73
Note:
Press the PAUSE button of the adjustment remote com-
mander each time to set the data.
mander each time to set the data.
MD-114 board:
Address
Data
72
02
73
02
MD-120 board:
Address
Data
72
08
73
08
4) Select page: 0, address: 10, and set data: 00.
Click on the first or last page to see other DCR-DVD103 / DCR-DVD602 / DCR-DVD602E / DCR-DVD653 / DCR-DVD653E / DCR-DVD92 / DCR-DVD92E (serv.man4) service manuals if exist.