DCR-DVD103, DCR-DVD602, DCR-DVD602E, DCR-DVD653, DCR-DVD653E, DCR-DVD92, DCR-DVD92E (serv.man4) - Sony Movie Service Manual (repair manual). Page 21

6-17

DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E

The DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/
DVD653/DVD653E are adjusted by the Automatic Adjustment Pro-
gram. The Automatic Adjustment Program enters automatically
via the SeusCam the adjustment operations that were formerly
entered manually by the adjustment remote commander (some
items may be adjusted by manual operation on the operation screen
of the SeusCam).

1) The Automatic Adjustment Program writes the adjustment re-

sults such as EVR data to the set through two-way communi-
cation with the camera via the SeusCam. Accordingly, the Au-
tomatic Adjustment Program must be used in the environment
where the SeusCam operates.

2) The Automatic Adjustment Program cannot be used when the

SEUS (digital camera adjustment software) is running. Exit
the SEUS before using the Automatic Adjustment Program.

3) The SeusCam must be already started on the PC when using

the Automatic Adjustment Program. With the SeusCam not
started, some adjustment items will take time in adjustment.

4) The program run time may vary depending on the environ-

ment of the personal computer used.

Before using the Automatic Adjustment Program, set the
following data using the adjustment remote commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 01, and press the

PAUSE button.

These settings are released if the 

[END]

 button is clicked

on the Main Menu screen of the Automatic Adjustment Pro-
gram.

Double-click the application file (DCR-DVD92 Series Auto-Adj
Ver_1.

[]

r

[][]

.exe), and the Automatic Adjustment Program will start.

[]

 (numeric value) of the file name varies depending on the

version of Automatic Adjustment Program.

When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-6 will appear. On this screen, select each adjust-
ment section.

6

4

3

2

1

5

7

1

[Connecting the Equipment]

 button

A connection diagram of the equipment is displayed.

2

[VIDEO SYSTEM ADJUSTMENT]

 button

The “VIDEO SYSTEM ADJUSTMENT” screen appears.

3

[CAMERA SYSTEM ADJUSTMENT]

 button

The “CAMERA SYSTEM ADJUSTMENT” screen appears.

4

[LCD SYSTEM ADJUSTMENT]

 button

The “LCD SYSTEM ADJUSTMENT” screen appears.

5

[Initializing of Flash Back Up]

 button

The “Initializing of Flash Back Up” screen appears.

6

[END]

 button

The Automatic Adjustment Program finishes.
At this time, the data set by the adjustment remote commander
are released.
If the data are not released with the 

[END]

 button, release them

through the following procedure using the adjustment remote
commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 00, and press the

PAUSE button.

3) Select page: 0, address: 01, and set data: 00.

7

This part indicates the version of Automatic Adjustment Pro-
gram.