Read Sony SDM-S76F Service Manual online
PRECAUTION
WARNING FOR THE SAFETY-RELATED COMPONENT.
• There are some special components used in LCD
monitor that are important for safety.
These parts are marked on the schematic diagram
and the replacement parts list.
It is essential that these critical parts should be
replaced with the manufacturer’s specified parts to
prevent electric shock, fire or other hazard.
These parts are marked on the schematic diagram
and the replacement parts list.
It is essential that these critical parts should be
replaced with the manufacturer’s specified parts to
prevent electric shock, fire or other hazard.
• Do not modify original design without obtaining written
permission from manufacturer or you will void the
original parts and labor guarantee.
original parts and labor guarantee.
• If you want to replace with the new backlight (CCFL) or
inverter circuit, must disconnect the AC adapter
because high voltage appears at inverter circuit about
650Vrms.
because high voltage appears at inverter circuit about
650Vrms.
TAKE CARE DURING HANDLING THE LCD MODULE WITH
BACKLIGHT UNIT.
• Must mount the module using mounting holes arranged
in four corners.
• Handle with care wires or connectors of the inverter
circuit. If the wires are pressed cause short and may
burn or take fire.
burn or take fire.
• Do not press on the panel, edge of the frame strongly
or electric shock as this will result in damage to the
screen.
screen.
• Do not scratch or press on the panel with any sharp
objects, such as pencil or pen as this may result in
damage to the panel.
• Protect the module from the ESD as it may damage
the electronic circuit (C-MOS).
• Make certain that treatment person’s bodies are
grounded through wrist band.
• Do not leave the module in high temperature and in
areas of high humidity for a long time.
Leakage Current Hot Check Circuit
• The module not is exposed to the direct sunlight.
• Avoid contact with water as it may a short circuit within
the module.
• If the surface of panel becomes dirty, please wipe it off
with a soft material. (Cleaning with a dirty or rough
cloth may damage the panel.)
cloth may damage the panel.)
3
SDM-S76F / SDM-S96F (E)
Click on the first or last page to see other SDM-S76F service manuals if exist.