Read Sony CPD-M151 Service Manual online
1-6
Customizing Your Monitor
14
Horizontal
Frequency*
Frequency*
Vertical
Frequency*
Frequency*
BRIGHTNESS
26
48. 4kHz / 60Hz
CONTRAST
26
48. 4kHz / 60Hz
Horizontal
Frequency*
Frequency*
Vertical
Frequency*
Frequency*
For vertical adjustment, select V using the ˘/≥
buttons and adjust the position using the +/–
buttons.
+ . . . to move the picture up
– . . . to move the picture down
buttons and adjust the position using the +/–
buttons.
+ . . . to move the picture up
– . . . to move the picture down
5
When you have finished, click [END] on the screen to
turn off the test pattern.
turn off the test pattern.
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.
To close the OSD, press the MENU button twice.
Adjusting the Picture Brightness
Once the brightness is adjusted, it will be stored in memory
for all input signals received.
for all input signals received.
1
Press the ¨ (brightness) ˘ button.
The BRIGHTNESS OSD appears.
The BRIGHTNESS OSD appears.
2
Press the +/– buttons.
+ . . . for more brightness
– . . . for less brightness
– . . . for less brightness
The OSD automatically disappears after about 3 seconds.
*
The horizontal and vertical frequencies for the received input
signal appear in the BRIGHTNESS OSD.
signal appear in the BRIGHTNESS OSD.
If the screen is too bright when using the monitor in a
dark room
dark room
Decrease the BACKLIGHT (page 16).
CENTER
H
V
V
26
Adjusting the Contrast
Once the contrast is adjusted, it will be stored in memory for
all input signals received.
all input signals received.
1
Press the > (contrast) ≥ button.
The CONTRAST OSD appears.
The CONTRAST OSD appears.
2
Press the +/– buttons.
+. . . for more contrast
– . . . for less contrast
– . . . for less contrast
The OSD automatically disappears after about 3 seconds.
*
The horizontal and vertical frequencies for the received input
signal appear in the CONTRAST OSD.
signal appear in the CONTRAST OSD.
Changing or Adjusting the Color
Temperature
Temperature
The color temperature is set to 9300K at the factory.
You can change the color temperature to 6500K or 5000K.
Use this function to adjust the color temperature so that it
matches the actual colors of a printed picture.
Once the color temperature is adjusted, it will be stored in
memory for all input signals received.
You can change the color temperature to 6500K or 5000K.
Use this function to adjust the color temperature so that it
matches the actual colors of a printed picture.
Once the color temperature is adjusted, it will be stored in
memory for all input signals received.
1
Press the MENU button.
The MENU OSD appears.
The MENU OSD appears.
MENU
MENU
EXIT
PHASE
PITCH
CENTER
COLOR
LANGUAGE
OPTION
PITCH
CENTER
COLOR
LANGUAGE
OPTION
MENU
OK
15
Getting Started
Customizing Your Monitor
F
D
ES
GB
I
2
Press the ˘/≥ buttons to select COLOR, and press the
MENU button again.
The COLOR OSD appears.
MENU button again.
The COLOR OSD appears.
3
Press the ˘/≥ buttons to select the color
temperature.
If you need to make further adjustments to the selected
color temperature, go to step 4.
If you don’t, press the MENU button. The MENU OSD
appears.
temperature.
If you need to make further adjustments to the selected
color temperature, go to step 4.
If you don’t, press the MENU button. The MENU OSD
appears.
4
Press the ˘/≥ buttons to select R (red) or B (blue),
and press the +/– buttons to get the desired color.
The color changes as the R or B components increase or
decrease with respect to G (green).
and press the +/– buttons to get the desired color.
The color changes as the R or B components increase or
decrease with respect to G (green).
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.
To close the OSD, press the MENU button twice.
Changing the On-Screen Display
Position
Position
You can change the OSD position (for example, when you
want to adjust the picture behind the OSD).
want to adjust the picture behind the OSD).
1
Press the MENU button.
The MENU OSD appears.
The MENU OSD appears.
2
Press the ˘/≥ buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
the MENU button again.
The OPTION OSD appears.
3
Press the ˘/≥ buttons to select
(OSD H POSITION)
or
(OSD V POSITION).
To adjust the horizontal
position
position
4
Press the +/– buttons to move the OSD to the desired
position.
position.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
seconds.
To close the OSD, press the MENU button twice.
MENU
COLOR
9300K
6500K
5000K
USER MODE
R
G
B
6500K
5000K
USER MODE
R
G
B
50
50
50
50
50
COLOR
9300K
6500K
5000K
USER MODE
R
G
B
6500K
5000K
USER MODE
R
G
B
50
50
50
50
50
MENU
MENU
OPTION
: 5SEC
: UNLOCK
: UNLOCK
OSD H POSITION
OPTION
: 5SEC
: UNLOCK
: UNLOCK
OSD H POSITION
OPTION
: 5SEC
: UNLOCK
: UNLOCK
OSD V POSITION
To adjust the vertical
position
position
MENU
EXIT
PHASE
PITCH
CENTER
COLOR
LANGUAGE
OPTION
PITCH
CENTER
COLOR
LANGUAGE
OPTION
MENU
OK
Click on the first or last page to see other CPD-M151 service manuals if exist.