Read Sony CPD-M151 Service Manual online
1-3
8
Getting Started
Step 3:Â Attaching the rear cover
After connecting the computer and power cord, attach the
supplied rear cover.
Make sure that you keep the screen upright when attaching
or detaching the rear cover.
supplied rear cover.
Make sure that you keep the screen upright when attaching
or detaching the rear cover.
1
Clamp the AC adapter cord.
2
Press the rear cover against the part for attaching
the cover.
the cover.
Unlocked
Locked
Align the marking tape of the
AC adapter cord to the clamp,
wind it once and close the
clamp.
AC adapter cord to the clamp,
wind it once and close the
clamp.
Clamp
Marking tape of the
AC adapter cord
AC adapter cord
3
Turn the screw to fasten the rear cover.
Using the monitor without the stand
Prepare:
Philip’s screw driver
Soft cloth to place under the LCD panel
Soft cloth to place under the LCD panel
1
Remove the screws from the fixing shaft of the stand.
2
Place the monitor on the soft cloth with the LCD
panel facing down, and pull the stand out from the
monitor.
panel facing down, and pull the stand out from the
monitor.
9
Getting Started
Getting Started
F
D
ES
GB
I
3
Connect the video signal cable and AC adapter cord
to the monitor.
to the monitor.
4
Clamp the AC adapter cord.
5
Press the rear cover against the part for attaching
the cover.
the cover.
Align the marking tape of the AC adapter cord to
the clamp, wind it once and close the clamp.
the clamp, wind it once and close the clamp.
Clamp
Marking tape of the
AC adapter cord
AC adapter cord
6
Turn the screw to fasten the rear cover.
7
Attach the rubber pads to the bottom of the
monitor.
After attaching the rubberpads, which prevent slipping,
stand the monitor up.
monitor.
After attaching the rubberpads, which prevent slipping,
stand the monitor up.
Unlocked
Locked
Peel off
Click on the first or last page to see other CPD-M151 service manuals if exist.