Read Sony CPD-L181 Service Manual online
1-7
Customizing Your Monitor
16
Locking the Controls
The control lock function disables all of the controls except
the u (power) switch, MENU and some other buttons on
the front panel.
the u (power) switch, MENU and some other buttons on
the front panel.
Once you select “LOCK,” you can select only the following
items in the MENU OSD:
• EXIT
• CONTROL LOCK and FACTORY PRESET in the
items in the MENU OSD:
• EXIT
• CONTROL LOCK and FACTORY PRESET in the
OPTION OSD
If you press any locked button, the
mark appears on
the screen.
1
Press the MENU button.
The MENU OSD appears.
The MENU OSD appears.
2
Press the ˘/≥ buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
the MENU button again.
The OPTION OSD appears.
3
Press the ˘/≥ buttons to select
(CONTROL
LOCK).
4
Press the – button to select LOCK.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
seconds.
To close the OSD, press the MENU button twice.
MENU
MENU
OPTION
: 5SEC
: UNLOCK
: UNLOCK
OSD H POSITION
OPTION
UNLOCK
LOCK
LOCK
CONTROL LOCK
OPTION
: 5SEC
ON
FACTORY PRESET
MENU
MENU
OPTION
: 5SEC
: UNLOCK
: UNLOCK
OSD H POSITION
To cancel the control lock
Press the + button in step 4 to select UNLOCK.
Resetting the Adjustments
You can reset all of the adjustments and settings to the
factory settings.
The color temperature is reset to 9300K, the zoom setting is
reset to FULL 1 mode, and the power saving delay time is
reset to 5 seconds. The control lock is cancelled. All other
adjustments return to the default settings. The on-screen
language, however, does not change.
factory settings.
The color temperature is reset to 9300K, the zoom setting is
reset to FULL 1 mode, and the power saving delay time is
reset to 5 seconds. The control lock is cancelled. All other
adjustments return to the default settings. The on-screen
language, however, does not change.
1
Press the MENU button.
The MENU OSD appears.
The MENU OSD appears.
2
Press the ˘/≥ buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
the MENU button again.
The OPTION OSD appears.
3
Press the ˘/≥ buttons to select ? (FACTORY
PRESET).
PRESET).
4
Press the + button.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
seconds.
To close the OSD, press the MENU button twice.
MENU
EXIT
PHASE
PITCH
CENTER
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
LANGUAGE
MENU
OK
MENU
EXIT
PHASE
PITCH
CENTER
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
LANGUAGE
MENU
OK
17
Getting Started
Additional Information
F
D
ES
GB
I
Additional Information
Additional Information
Preset and User Modes
This monitor has factory preset modes for the most popular
industry standards for true “plug and play” compatibility.
(See Appendix for a list of the factory preset modes.)
When a new input signal is entered, the monitor selects the
appropriate factory preset mode and momentarily adjusts
the phase calibration to provide a high quality picture to the
center of the screen. The calibration is stored in memory
and is immediately recalled whenever the same input signal
is received.
For input signals that do not match one of the factory preset
modes, the digital Multiscan technology of this monitor
performs all of the adjustments necessary to ensure that a
clear picture appears on the screen for any timing in the
monitor’s frequency range. However, it may be necessary
to fine tune the vertical/horizontal centering. Simply press
the AUTO button or adjust the monitor according to the
adjustment instructions. The adjustments are stored
automatically as a user mode and recalled whenever the
corresponding input signal is received.
industry standards for true “plug and play” compatibility.
(See Appendix for a list of the factory preset modes.)
When a new input signal is entered, the monitor selects the
appropriate factory preset mode and momentarily adjusts
the phase calibration to provide a high quality picture to the
center of the screen. The calibration is stored in memory
and is immediately recalled whenever the same input signal
is received.
For input signals that do not match one of the factory preset
modes, the digital Multiscan technology of this monitor
performs all of the adjustments necessary to ensure that a
clear picture appears on the screen for any timing in the
monitor’s frequency range. However, it may be necessary
to fine tune the vertical/horizontal centering. Simply press
the AUTO button or adjust the monitor according to the
adjustment instructions. The adjustments are stored
automatically as a user mode and recalled whenever the
corresponding input signal is received.
Power Saving Function
This monitor meets the power-saving guidelines set by
VESA and
VESA and
E
NERGY
S
TAR, as well as the more stringent
NUTEK .
If the monitor is connected to a computer or video graphics
board that is VESA DPMS (Display Power Management
Signaling) compliant, the monitor will automatically reduce
power consumption in three stages as shown below.
You can set the delay time before the monitor enters the
power saving mode using the OSD. Set the time according
to “Setting the Power Saving Delay Time” on page 15.
If the monitor is connected to a computer or video graphics
board that is VESA DPMS (Display Power Management
Signaling) compliant, the monitor will automatically reduce
power consumption in three stages as shown below.
You can set the delay time before the monitor enters the
power saving mode using the OSD. Set the time according
to “Setting the Power Saving Delay Time” on page 15.
*
“Sleep” and “deep sleep” are power saving modes defined by
the Environmental Protection Agency.
the Environmental Protection Agency.
** When your computer enters the power saving mode, the input
signal is cut and NO INPUT SIGNAL appears on the screen.
After the time set in “Changing the Power Saving Delay Time”
(page 15) has elapsed, the monitor enters the power saving
mode.
After the time set in “Changing the Power Saving Delay Time”
(page 15) has elapsed, the monitor enters the power saving
mode.
Troubleshooting
This section may help you isolate the cause of a problem
and as a result, eliminate the need to contact technical
support.
and as a result, eliminate the need to contact technical
support.
On-screen messages
If there is something wrong with the input signal, one of the
following messages appears on the screen. To solve the
problem, see “Trouble symptoms and remedies” on page 18.
following messages appears on the screen. To solve the
problem, see “Trouble symptoms and remedies” on page 18.
“OUT OF SCAN RANGE” indicates that the input signal is
not supported by the monitor’s specifications.
not supported by the monitor’s specifications.
“NO INPUT SIGNAL” indicates that no signal is input to the
monitor.
monitor.
INFORMATION
OUT OF SCAN RANGE
Power consumption
mode
mode
Normal operation
Standby (1st mode)
Suspend (2nd mode)
(sleep)*
(sleep)*
Active-off (3rd mode)**
(deep sleep)*
(deep sleep)*
Power-off
Main power-off
Power
consumption
consumption
≤
48 W
≤
15 W
≤
15 W
≤
1 W
≤
1 W
0 W
u
Indicator
Green
Green and orange
alternate
alternate
Green and orange
alternate
alternate
Orange
Off
Off
1
2
3
4
5
6
Click on the first or last page to see other CPD-L181 service manuals if exist.