Read Sony CPD-201VS Service Manual online
1-3
14
Preset and user modes
The Multimedia CPD-101VS/201VS display has factory preset modes for
the 9 most popular industry standards for true “plug and play”
capability.
For less common modes, its Digital Multiscan Technology will perform
all of the complex adjustments necessary to ensure a high quality picture
for any timing between 30 and 70␣kHz.
the 9 most popular industry standards for true “plug and play”
capability.
For less common modes, its Digital Multiscan Technology will perform
all of the complex adjustments necessary to ensure a high quality picture
for any timing between 30 and 70␣kHz.
✔
Note for Windows
®
95/98 users
To maximize the potential of your display, install the new model information file from the
supplied Windows
supplied Windows
®
Monitor Information Disk onto your PC.
This display complies with the “VESA DDC” Plug & Play standard. If your PC/graphics board
complies with DDC, select “Plug & Play Monitor (VESA DDC)” or this display’s model name as
the monitor type in the “Control Panel” of Windows
complies with DDC, select “Plug & Play Monitor (VESA DDC)” or this display’s model name as
the monitor type in the “Control Panel” of Windows
®
95/98. If your PC/graphics board has
difficulty communicating with this display, load the Windows
®
Monitor Information Disk and
select this display’s model name as the monitor type.
Windows
®
is a registered trademark of Microsoft Corporation in the United States and other
countries.
✔
Note on recommended horizontal timing conditions
Horizontal sync width should be more than 1.0 µsec.
Horizontal blanking width should be more than 3.6 µsec.
Horizontal blanking width should be more than 3.6 µsec.
Using Your Display
Using Your Display
Resolution
(dots
(dots
×
lines)
640
×
400
640
×
480
640
×
480
800
×
600
800
×
600
1024
×
768
1024
×
768
1152
×
864
1280
×
1024
Horizontal
Frequency
31.5 kHz
31.5 kHz
43.3 kHz
37.9 kHz
46.9 kHz
60.0 kHz
68.7 kHz
54.8 kHz
64.0 kHz
Frequency
31.5 kHz
31.5 kHz
43.3 kHz
37.9 kHz
46.9 kHz
60.0 kHz
68.7 kHz
54.8 kHz
64.0 kHz
Vertical
Frequency
70 Hz
60 Hz
85 Hz
60 Hz
75 Hz
75 Hz
85 Hz
60 Hz
60 Hz
Frequency
70 Hz
60 Hz
85 Hz
60 Hz
75 Hz
75 Hz
85 Hz
60 Hz
60 Hz
NO.
1
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
15
p
To enter new timings
When using a video mode that is not one of the 9 factory preset modes,
some fine tuning may be required to optimize the display to your
preferences. Simply adjust the display according to the adjustment
instructions. The adjustments will be stored automatically and recalled
whenever that mode is used.
A total of 16 user-defined modes can be stored in memory. If a 17th mode
is entered, it will replace the first.
some fine tuning may be required to optimize the display to your
preferences. Simply adjust the display according to the adjustment
instructions. The adjustments will be stored automatically and recalled
whenever that mode is used.
A total of 16 user-defined modes can be stored in memory. If a 17th mode
is entered, it will replace the first.
Using the tilt-swivel
With the tilt-swivel, this unit can be adjusted to be viewed at your
desired angle within 90° horizontally and 7° vertically.
To turn the unit vertically and horizontally, hold it at its bottom with
both hands.
Be careful not to get your hands caught between the display and the tilt-
swivel.
desired angle within 90° horizontally and 7° vertically.
To turn the unit vertically and horizontally, hold it at its bottom with
both hands.
Be careful not to get your hands caught between the display and the tilt-
swivel.
Using Your Display
45˚
45˚
7˚
16
Damper wire
Using a white background, a very thin horizontal line on the screen may
be visible as shown below. This line is the damper wire.
The Trinitron tube has a vertically striped Aperture Grille inside. The
Aperture Grille allows more light to pass through to the screen giving
the Trinitron CRT more color and brightness.
The damper wire is attached to the Aperture Grille to prevent vibration
of the Aperture Grille wire so that the screen image is constantly stable.
be visible as shown below. This line is the damper wire.
The Trinitron tube has a vertically striped Aperture Grille inside. The
Aperture Grille allows more light to pass through to the screen giving
the Trinitron CRT more color and brightness.
The damper wire is attached to the Aperture Grille to prevent vibration
of the Aperture Grille wire so that the screen image is constantly stable.
Using Your Display
Approx. 6 cm
(2
(2
3
/
8
inches)
Damper wires
Approx. 6 cm (2
3
/
8
inches)
(CPD-201VS only)
17
Adjustments
Adjustments
When one of the preset-type signals is input, no picture adjustment is
necessary.
You can, however, adjust the picture to your preference by following the
procedure described below.
necessary.
You can, however, adjust the picture to your preference by following the
procedure described below.
To adjust the display, turn on the display and computer.
Introducing the On-Screen Display
Beyond sound volume and picture contrast adjustment, most
adjustments are made using the OSD menu system.
adjustments are made using the OSD menu system.
Using the OSD menu
1.
Press the MENU button to display the MENU OSD.
2.
Use the the four arrow (>/./?//) buttons (. +/– and > +/–
buttons) to select the item you want to adjust.
Change the item from blue to yellow.
buttons) to select the item you want to adjust.
Change the item from blue to yellow.
3.
Press the MENU button again.
The item is selected and the item’s OSD appears.
The item is selected and the item’s OSD appears.
MENU
COLOR
MENU
OK
CENTER SCREEN
BRIGHT
EXIT
ZOOM
GEOM
SIZE
OPTION
MENU
COLOR
MENU
OK
CENTER SCREEN
BRIGHT
EXIT
ZOOM
GEOM
SIZE
OPTION
BRIGHT/CONTRAST
BRIGHTNESS
50
Click on the first or last page to see other CPD-201VS service manuals if exist.