CPD-201VS - Sony Monitor Service Manual (repair manual). Page 11

1-7

Adjustments

Press the ?// buttons to select the desired language.

Press the MENU button again.

✎ 

If you don’t touch any buttons, the OSD automatically disappears after 30 seconds.

p

Select the item you want to reset.
First select the OSD containing the item in the MENU OSD, and then
select the item in the OSD.

Press the ? button while the OSD of the item is on.
Only the item highlighted in yellow returns to the factory setting.

p

Press the ? button while no OSD is displayed.

p

Press and hold the ? button for more than two seconds.
All adjustments return to the factory settings.

Graphic Picture Enhancement is a function designed for your viewing
comfort.
There are four GPE modes: AUTO, MODE 1, MODE 2 and OFF.
The default setting is “AUTO.”

p

This mode is effective only with “IntelliLight



” compatible applications.

When an image playback window with “IntelliLight” coding appears on
the screen, the display senses the exact location and size of the window
and applies a higher brightness and sharpness effect to images inside the
window, while the rest of the screen remains at standard picture quality.
For inquiries about “IntelliLight” and compatible software, check Sony’s
web site (www.ita.sel.sony.com) or call Sony Technical Support (1-888-
4SONYPC).

“IntelliLight



” is a trademark of Sony Electronics Inc.

✔

If one of the four corners of the “IntelliLight” window is covered or if the window goes
beyond the screen border, the GPE effect turns off.

✎

You can adjust the picture contrast or brightness of the screen outside of the “IntelliLight”
window. The “IntelliLight” window always remains clear and sharp regardless of the
adjustments made to the rest of the screen.

p

Higher contrast is applied across the entire screen. MODE 1 is designed
to enhance still image presentations.

✔

Whenever the screen resolution is changed, power saving activated, or power turned off,
MODE 1 is cancelled and GPE returns to the AUTO mode.

Graphic Picture Enhancement (GPE)

Window with “IntelliLight” coding has
higher brightness and sharpness.

Standard picture quality

n

p

Higher contrast and sharpness is applied across the entire screen.
MODE 2 is designed to enhance graphic games and movie/video
presentations.

✔

Whenever the screen resolution is changed, power saving activated, or power turned off,
MODE 2 is cancelled and GPE returns to the AUTO mode.

✎

MODE 2 may produce ghost images when displaying text oriented applications. In this
case, select the AUTO or OFF mode.

p

Screen sharpness and brightness are set to standard quality without any
additional enhancements. This mode is suited for text-based
applications.

✔

Once OFF mode is selected, GPE status stays in the OFF mode until you manually select
other GPE modes.

Press the GPE button repeatedly until the screen message of the desired
mode is displayed.
Each time you press the GPE button, the GPE mode changes as follows:

AUTO n GPE OFF n MODE 1 n MODE 2

The GPE indicator lights up when AUTO, MODE 1 or MODE 2 is
selected.

Appears for three seconds

Graphic Picture Enhancement (GPE)

CPD-101VS: 110 W (max)
CPD-201VS: 120 W (max)
15 W (max)

8 W (max)
0 W

This display meets the power saving guidelines set by the International

E

NERGY 

S

TAR Program. It is capable of reduced power consumption

when used with a computer equipped with Display Power Management
Signaling (DPMS). By sensing the absence of the sync signal coming
from the computer, it will reduce the power consumption as follows:

✔

The Power Saving function will automatically put the display into Deep Sleep mode if the
power switch is turned on without any video signal input. Once the horizontal and vertical
syncs are sensed, the display will automatically return to its Normal Operation mode.

Power Saving Function

Normal
Operation
Sleep

Deep Sleep
Power-off

Recovery
 time
—

Approx. 3 sec.

Approx. 10 sec.
—

U

Green

Green ˜
     Orange
Orange
Off

1

2

3
4