CPD-2001G - Sony Monitor Service Manual (repair manual). Page 6

1-3

1 Using the COLOR OSD

You can adjust the monitor’s color temperature using the
COLOR OSD. For example, you can adjust the monitor to
match the colors of a printed picture.
You can adjust the color temperature from 9300K (blue-white)
to 5000K (warm red).
This setting is stored in memory for all input signals.

1 Press the MENU button to display the MENU OSD.

2 Highlight the COLOR OSD using the BRIGHTNESS and

CONTRAST buttons and press the MENU button again.

3 Press the ¨ (BRIGHTNESS) ./> buttons to select either the

9300K, 5000K or variable 

 option.

• The 9300K and 5000K options display accurate preset

color temperatures.

• The variable 

 option allows you to adjust the monitor

using the full range of color temperatures. Adjust to the
desired color temperature using the CONTRAST
buttons.

4 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

Note
If you are using one of the Video Enhancement Modes, you can
only adjust the color temperature from 11,000K to 9,300K.
For more information on Video Enhancement Mode, refer to
page 10.

2 Using the CENTER OSD

You can adjust the picture centering using the CENTER OSD.
This setting is stored in memory for the current input signal.

1 Press the MENU button to display the MENU OSD.

2 Highlight the CENTER OSD using the BRIGHTNESS and

CONTRAST buttons and press the MENU button again.

3 To adjust vertical centering, press the ¨ (BRIGHTNESS)

./> buttons.

4 To adjust horizontal centering, press the > (CONTRAST)

?// buttons.

5 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

3 Using the SCREEN OSD

You can adjust the convergence of the picture and cancel the
picture’s moire using the SCREEN OSD.
Convergence is the alignment of the Red, Green and Blue
electron beams on the screen. When convergence is not aligned,
red or blue shadows may be noticeable (especially with text)
which can affect the clarity or focus of the image.
Moire is a wavy or elliptical pattern which may appear on the
screen. The moire cancel adjustment is provided to eliminate
moire.
This setting is stored in memory for all input signals.

1 Press the MENU button to display the MENU OSD.

2 Highlight the SCREEN OSD using the BRIGHTNESS and

CONTRAST buttons and press the MENU button again.

3 Press the ¨ (BRIGHTNESS) ./> buttons to select the

desired adjustment item.

4 Press the > (CONTRAST) ?// buttons to adjust the item.
5 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

adjust the horizontal convergence

adjust the vertical convergence

eliminate elliptical or wavy lines on
the screen

adjust the degree of moire
cancellation

*

CANCEL MOIRE must be “ON” for “

 (MOIRE ADJUST)” to

appear on the screen. MOIRE ADJUST operates only for
horizontal input signals greater than 43 kHz.

  

H CONVERGENCE

  

V CONVERGENCE

  

CANCEL MOIRE

  

MOIRE ADJUST

7 Using the LANGUAGE OSD

You can set the OSD language to English, German, French,
Spanish or Japanese using the LANGUAGE OSD.
To reset to Japanese, press the RESET button while the
LANGUAGE OSD is displayed.

1 Press the MENU button to display the MENU OSD.

2 Highlight the LANGUAGE OSD using the BRIGHTNESS

and CONTRAST buttons and press the MENU button again.

3 Press the ¨ (BRIGHTNESS) ./> buttons to select the

desired language.

4 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

5 Using the OPTION OSD

You can manually degauss (demagnetize) the CRT, move the
OSD position and lock the user controls using the OPTION
OSD.

1 Press the MENU button to display the MENU OSD.

2 Highlight the OPTION OSD using the BRIGHTNESS and

CONTRAST buttons and press the MENU button again.

3 Press the ¨ (BRIGHTNESS) ./> buttons to select the

desired adjustment item.

4 Press the > (CONTRAST) ?// buttons to activate the

manual degauss, move the OSD position or lock the user
controls.

5 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

Degauss: If a second degauss cycle is needed, allow a
minimum interval of 20 minutes for the best result.

OSD Position Change: To change the OSD position, press the
¨

 (BRIGHTNESS) ./> buttons to select the direction

(horizontal or vertical), then press the > (CONTRAST)
?// buttons to move the OSD in the selected direction.

User Control Lock: Once you select “ON” to lock the user
controls, you cannot select any item except “EXIT” and
“OPTION” in the MENU OSD. If you try to access any other
OSD, the 

H mark appears on the screen.

To cancel the Control Lock: Repeat the above procedure and
set Control Lock to “OFF.”

6 Using the SIZE OSD

You can adjust the picture size using the SIZE OSD.
This setting is stored in memory for the current input signal.

1 Press the MENU button to display the MENU OSD.

2 Highlight the SIZE OSD using the BRIGHTNESS and

CONTRAST buttons and press the MENU button again.

3 To adjust the vertical size press the ¨ (BRIGHTNESS) ./>

buttons.

4 To adjust the horizontal size press the > (CONTRAST)

?// buttons.

5 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

4 Using the ZOOM OSD

You can enlarge or reduce the picture size using the ZOOM
OSD.
This setting is stored in memory for the current input signal.

1 Press the MENU button to display the MENU OSD.

2 Highlight the ZOOM OSD using the BRIGHTNESS and

CONTRAST buttons and press the MENU button again.

3 Press the > (CONTRAST) ?// buttons to enlarge or

reduce the picture size.

4 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

Note
You can enlarge or reduce the picture size until either the
horizontal or vertical size reaches its maximum or minimum
value.