Read Sony CPD-2001G Service Manual online
1-2
5
Getting Started
J
C
EN
Video Connector
Pin No.
Signal
8
Blue Ground
9
Not used (no pin)
10
Ground
11
Ground
12
SDA (serial data)
13
Horizontal Sync
14
Vertical Sync
15
SCL (serial clock)
Use of the Tilt/Swivel
With the tilt/swivel, you can adjust this monitor to any desired
angle within 180° horizontally and 20° vertically.
To turn the monitor vertically and horizontally, hold it at the
bottom with both hands as shown below.
angle within 180° horizontally and 20° vertically.
To turn the monitor vertically and horizontally, hold it at the
bottom with both hands as shown below.
Getting Started
Adjusting the Picture Brightness and
Contrast
Contrast
1
Press the ¨ (BRIGHTNESS) ./> or
>
>
(CONTRAST) ?// buttons.
The BRIGHTNESS/CONTRAST OSD appears.
2
To adjust the brightness
Press the ¨ (BRIGHTNESS) ./> buttons.
Press the ¨ (BRIGHTNESS) ./> buttons.
To adjust the contrast
Press the > (CONTRAST) ?// buttons.
Press the > (CONTRAST) ?// buttons.
Horizontal
frequency
frequency
Vertical
frequency
frequency
15
°
90
°
90
°
5
°
6
11 12 13 14 15
1
2
3
4
5
7
8
9 10
Customizing Your Monitor
BRIGHTNESS/CONTRAST
26
26
60.0kHz/ 85Hz
Note
The default setting for the OSD Language is Japanese. If you need
to change the OSD Language, see “Using the LANGUAGE OSD”
on page 8.
The default setting for the OSD Language is Japanese. If you need
to change the OSD Language, see “Using the LANGUAGE OSD”
on page 8.
Pin No. Signal
1
1
Red
2
Green (Composite
Sync on Green)
Sync on Green)
3
Blue
4
Ground
5
DDC Ground
6
Red Ground
7
Green Ground
6
The OSD (On-screen Display) System
Introducing the OSD System
You can adjust most of the monitor’s settings using the OSDs
(On-screen Display). All of the OSDs numbered in this
illustration are described on the following pages in order. You
can access any of these OSDs from the MENU OSD. To adjust
monitor settings using the OSDs, follow the steps below:
(On-screen Display). All of the OSDs numbered in this
illustration are described on the following pages in order. You
can access any of these OSDs from the MENU OSD. To adjust
monitor settings using the OSDs, follow the steps below:
Basic controls:
• Use the
(MENU) button to display the MENU OSD
and to select menu items.
• Use the ¨ (BRIGHTNESS) ./> and > (CONTRAST)
?// buttons to highlight menu items and to adjust
settings.
settings.
To adjust the monitor settings:
1 Press the MENU button to display the MENU OSD.
2 Highlight the desired OSD using the BRIGHTNESS and
CONTRAST buttons and press the MENU button again.
3 If necessary, use the BRIGHTNESS buttons to select a
specific item.
4 Adjust the monitor setting using the BRIGHTNESS and
CONTRAST buttons.
• To reset the current item to its original setting, press the
(RESET) button while the item’s adjustment OSD
is displayed.
5 When you finish adjusting the setting, press the MENU
button to return to the MENU OSD.
Press the MENU button twice to return to normal viewing.
Press the MENU button twice to return to normal viewing.
• Resetting: If you press the RESET button while an OSD is
displayed, only the current adjustment item is reset. For
additional information on using the reset function, see
the “Resetting the Adjustments” section on page 9.
additional information on using the reset function, see
the “Resetting the Adjustments” section on page 9.
• The OSD automatically disappears after 30 seconds.
Note
The default setting for the OSD Language is Japanese. If you need
to change the OSD Language, see “Using the LANGUAGE OSD”
on page 8.
The default setting for the OSD Language is Japanese. If you need
to change the OSD Language, see “Using the LANGUAGE OSD”
on page 8.
COLOR
CENTER
SCREEN
GEOMETRY
ZOOM
LANGUAGE
OPTION
SIZE
Customizing Your Monitor
MENU
EXIT
CENTER
SIZE
GEOM
COLOR
LANG
ZOOM
SCREEN
OPTION
OK
MENU
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
FRANÇAIS
DEUTSCH
ESPAÑOL
LANGUAGE
SIZE
26
73
CENTER
26
73
ZOOM
73
V
66
H
ROTATION
GEOMETRY
26
9300K
5000K
5000K
COLOR
MANUAL DEGAUSS
OPTION
ON
H CONVERGENCE
SCREEN
26
Click on the first or last page to see other CPD-2001G service manuals if exist.