Read Sony DVP-NS955V Service Manual online
1-5
DVP-NS955V
21
H
o
o
kups
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
Components to be connected
Connection
Your setup (example)
TV
• Surround effects:
– TVS DYNAMIC (page 54)
– TVS WIDE (page 54)
– TVS DYNAMIC (page 54)
– TVS WIDE (page 54)
(page 23)
Stereo amplifier (receiver) and 2 speakers
• Surround effects:
– TVS STANDARD (page 54)
– TVS STANDARD (page 54)
or
MD deck/DAT deck
MD deck/DAT deck
• Surround effects:
– TVS STANDARD (page 54)
– TVS STANDARD (page 54)
(page 24)
AV amplifier (receiver) having a Dolby
*
1
Surround (Pro Logic) decoder and 3 to 6
speakers
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 94)
– Dolby Surround (Pro Logic) (page 94)
(page 25)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 94)
– DTS (5.1 ch) (page 94)
– Super Audio CD Multi channel (page 94)
– MPEG audio (5.1 ch) (page 94)
– Dolby Digital (5.1 ch) (page 94)
– DTS (5.1 ch) (page 94)
– Super Audio CD Multi channel (page 94)
– MPEG audio (5.1 ch) (page 94)
or
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS*
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS*
2
, or MPEG audio
decoder and 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 94)
– DTS (5.1 ch) (page 94)
– MPEG audio (5.1 ch) (page 94)
– Dolby Digital (5.1 ch) (page 94)
– DTS (5.1 ch) (page 94)
– MPEG audio (5.1 ch) (page 94)
(page 26)
A
D
A
B
C
D
,continued
22
z
Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
conforms to the 96 kHz sampling frequency, use
connection .
*1 Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
double-D symbol are trademarks of Dolby
Laboratories.
*2 Manufactured under license from Digital
Theater Systems, Inc. U.S. Pat. No’s.
5,451,942; 5,956,674; 5,974,380; 5,978,762;
6, 226, 616; 6, 487, 535 and other U.S. and
world-wide patents issued and pending. “DTS”
and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2003 Digital Theater Systems,
Inc. All Rights Reserved.
5,451,942; 5,956,674; 5,974,380; 5,978,762;
6, 226, 616; 6, 487, 535 and other U.S. and
world-wide patents issued and pending. “DTS”
and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2003 Digital Theater Systems,
Inc. All Rights Reserved.
D
23
H
o
o
kups
Connecting to your TV
This connection will use your TV’s speakers for sound. If you use the SCART cord in pattern
B
B
of “Step 3: Connecting the Video Cords” (page 17), you do not have to connect audio cords
to your TV.
* The yellow plug is used for video signals (page
17).
z
Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV’s audio
input jack.
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV’s audio
input jack.
A
OPTICAL
FRONT
COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
DIGITAL OUT
5.1CH OUTPUT
LINE 1(RGB)-TV
REAR
CENTER
WOOFER
LINE 2
L
R
R-AUDIO-L
LINE OUT
S VIDEO
OUT
VIDEO
Y
COMPONENT VIDEO OUT
PR/CR
PB/CB
A
R-AUDIO-L
LINE OUT
VIDEO
TV
l: Signal flow
CD/DVD player
(white)
(red)
Audio/video
cord (supplied
with UK
models)
cord (supplied
with UK
models)
to audio input
(yellow)*
(white)
(red)
(yellow)*
to LINE OUT
L/R (AUDIO)
L/R (AUDIO)
,continued
24
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
your stereo amplifier (receiver).
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT jacks.
the DIGITAL OUT jacks.
B
B-1
B-2
OPTICAL
FRONT
COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
DIGITAL OUT
5.1CH OUTPUT
LINE 1(RGB)-TV
REAR
CENTER
WOOFER
LINE 2
L
R
R-AUDIO-L
LINE OUT
S VIDEO
OUT
VIDEO
Y
COMPONENT VIDEO OUT
PR/CR
PB/CB
R-AUDIO-L
LINE OUT
VIDEO
B-1
B-2
OPTICAL
COAXIAL
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(white)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
Stereo audio cord
(not supplied)
(not supplied)
to audio input
to coaxial or optical digital input
Coaxial digital cord
(not supplied)
(not supplied)
or
l: Signal flow
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
(red)
Click on the first or last page to see other DVP-NS955V service manuals if exist.