Read Sony DVP-NS955V Service Manual online
1-7
DVP-NS955V
29
H
o
o
kups
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
aspect ratio of the TV to be connected
appears.
7
Press X/x to select the setting that
matches your TV type.
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 82)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
standard TV with a wide-screen mode
• 16:9 (page 82)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 82)
8
Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
of video signal output from the LINE
(RGB)-TV jack appears.
9
Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
signal you want to output from the
LINE (RGB)-TV jack.
◆ Video signals
• VIDEO (page 82)
◆ S video signals
• S VIDEO (page 82)
◆ RGB signals
• RGB (page 82)
When you select “RGB,” you will be
unable to use the PROGRESSIVE
button, and the player will not output
video signals from the COMPONENT
VIDEO OUT jacks.
• VIDEO (page 82)
◆ S video signals
• S VIDEO (page 82)
◆ RGB signals
• RGB (page 82)
When you select “RGB,” you will be
unable to use the PROGRESSIVE
button, and the player will not output
video signals from the COMPONENT
VIDEO OUT jacks.
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
of jack used to connect your amplifier
(receiver) appears.
11
Press X/x to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
then press ENTER.
connect to an amplifier (receiver),
then press ENTER.
Choose the item that matches the audio
connection you selected on pages 23 to
26 (
connection you selected on pages 23 to
26 (
through
).
• If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
finished and connections are complete.
• Select “LINE OUTPUT L/R
(AUDIO).” Quick Setup is finished and
connections are complete.
connections are complete.
• Select “DIGITAL OUTPUT.” The
Setup Display for “DOLBY DIGITAL”
appears.
appears.
or both
and
• Select “DIGITAL & 5.1CH OUTPUT.”
The Setup Display for “DOLBY
DIGITAL” appears.
DIGITAL” appears.
SCREEN SETUP
TV TYPE:
16:9
4:3 LETTER BOX
4:3 PAN SCAN
FULL
SCREEN SAVER:
LINE:
BACKGROUND:
4:3 OUTPUT:
16:9
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
16:9
ON
JACKET PICTURE
LINE:
VIDEO
VIDEO
S VIDEO
RGB
4:3 OUTPUT:
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
(receiver)? Select the type of jack you
are using.
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
YES
NO
A
D
A
B-1
C-1
B-2
C-2
D-2
D-1
D-1
D-2
,continued
30
12
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 24 to
26 (
connection you selected on pages 24 to
26 (
through
).
• D-PCM (page 86)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 86)
decoder) (page 86)
13
Press ENTER.
“DTS” is selected.
14
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 24 to
26 (
connection you selected on pages 24 to
26 (
through
).
• D-PCM (page 86)
• DTS (only if the amplifier (receiver)
has a DTS decoder) (page 86)
15
Press ENTER.
◆ When “DIGITAL OUTPUT” is selected
in step 11
• Quick Setup is finished and
in step 11
• Quick Setup is finished and
connections are complete.
• If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (86).
“MPEG” (86).
◆ When “DIGITAL & 5.1CH OUTPUT” is
selected in step 11
• The Setup Display for “SPEAKER
selected in step 11
• The Setup Display for “SPEAKER
SETUP” appears.
16
Press X/x to select the size of the
centre speaker.
If no centre speaker is connected, select
“NONE” (87).
“NONE” (87).
17
Press ENTER.
“REAR” is selected.
18
Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
“NONE.”
“NONE.”
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
MPEG:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
D-PCM
48kHz/96kHz PCM:
48kHz/16bit
DTS:
DOLBY DIGITAL
B-2
C-2
D-2
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
MPEG:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
PCM
D-PCM
48kHz/96kHz PCM:
DTS:
DTS
48kHz/16bit
D-PCM
B
D
B-2
C-2
D-2
SPEAKER SETUP(DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
LARGE
YES
SMALL
NONE
LARGE
SPEAKER SETUP(DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
LARGE(REAR)
YES
LARGE
LARGE(REAR)
LARGE(SIDE)
31
H
o
o
kups
19
Press ENTER.
“SUBWOOFER” is selected.
20
Press X/x to select whether or
not you have connected a
subwoofer.
subwoofer.
21
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 86).
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 86).
Enjoying the surround sound
effects
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 24 to
26 (
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 24 to
26 (
through
). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
See page 80 for using the Setup Display.
adjusted when you first connect the player.
See page 80 for using the Setup Display.
Audio Connection (pages 24 to 26)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 85).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 85).
• Set “DIGITAL OUT” to “ON” (page 85).
• Set “DISTANCE,” “LEVEL (FRONT),”
and “LEVEL (REAR)” according to the
connected speakers (page 88).
connected speakers (page 88).
z
Hints
• For connections
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 86).
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 86).
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON”
(page 85).
turned down, set “AUDIO ATT” to “ON”
(page 85).
• For DVP-NS955V
The speaker size you set in steps 16 through 20
will also adjust the Super Audio CD speaker size
of “SPEAKER SETUP.” If you want to change
the speaker size for Super Audio CDs, you can set
in “SPEAKER SETUP” (page 87).
will also adjust the Super Audio CD speaker size
of “SPEAKER SETUP.” If you want to change
the speaker size for Super Audio CDs, you can set
in “SPEAKER SETUP” (page 87).
SPEAKER SETUP(DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
YES
LARGE(REAR)
NONE
YES
B
D
A
B-1
C-1
B-2
C-2
D-2
D-1
B-2
C-2
D-2
B-1
C-1
D-1
32
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1
Turn on your TV.
2
Press [/1.
The player turns on.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
4
Press A on the player, and place a
disc on the disc tray.
disc on the disc tray.
5
Press H.
The disc tray closes. The player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 35. For VIDEO CDs,
see page 38.
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 35. For VIDEO CDs,
see page 38.
To enjoy the clarity of Super Audio CD/CD
sound more (DVP-NS955V only)
sound more (DVP-NS955V only)
You can minimize the effect of the video
output by switching it off.
Press VIDEO ON/OFF, so that the VIDEO
OFF indicator lights up on the player.
To cancel the setting, press VIDEO ON/OFF
again.
output by switching it off.
Press VIDEO ON/OFF, so that the VIDEO
OFF indicator lights up on the player.
To cancel the setting, press VIDEO ON/OFF
again.
To turn off the player
Press [/1. The player enters standby mode.
z
Hint
The player turns off automatically whenever you
leave it in stop mode for more than 30 minutes.
(Auto Power Off function)
leave it in stop mode for more than 30 minutes.
(Auto Power Off function)
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT jacks.
the DIGITAL OUT jacks.
H
[/1
DVP-LS785V
VIDEO
ON/OFF
(DVP-
NS955V
only)
ON/OFF
(DVP-
NS955V
only)
Z
[/1
H
A
DVP-NS955V
[/1
A
H/
Playback
Dial
Playback
Dial
Playback side facing down
Click on the first or last page to see other DVP-NS955V service manuals if exist.