Read Sony DVP-NS955V Service Manual online
1-6
DVP-NS955V
25
H
o
o
kups
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
Notes
• When connecting 6 speakers, replace the
monaural rear speaker with a centre speaker, 2
rear speakers and a subwoofer.
rear speakers and a subwoofer.
• Super Audio CD audio signals are not output from
the DIGITAL OUT jacks.
C
C-1
C-2
OPTICAL
FRONT
COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
DIGITAL OUT
5.1CH OUTPUT
LINE 1(RGB)-TV
REAR
CENTER
WOOFER
LINE 2
L
R
R-AUDIO-L
LINE OUT
S VIDEO
OUT
VIDEO
Y
COMPONENT VIDEO OUT
PR/CR
PB/CB
R-AUDIO-L
LINE OUT
VIDEO
C-1
C-2
OPTICAL
COAXIAL
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Centre
Rear (mono)
Stereo audio cord
(not supplied)
(not supplied)
[Speakers]
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
(red)
(white)
to coaxial or optical digital input
Coaxial digital cord
(not supplied)
(not supplied)
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
l: Signal flow
,continued
26
Connecting to an AV amplifier (receiver) with 5.1 ch input jacks and/or a
digital input jack and 4 to 6 speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
.
If you want to use the Dolby Digital, MPEG audio, or DTS decoder function on your AV
amplifier (receiver), connect to its digital jack using
amplifier (receiver), connect to its digital jack using
. With the following connections, you
can enjoy a more realistic audio presence in the comfort of your own home.
D
D-1
D-2
OPTICAL
FRONT
COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
DIGITAL OUT
5.1CH OUTPUT
LINE 1(RGB)-TV
REAR
CENTER
WOOFER
LINE 2
L
R
R-AUDIO-L
LINE OUT
S VIDEO
OUT
VIDEO
Y
COMPONENT VIDEO OUT
PR/CR
PB/CB
D-2
D-1
FRONT
5.1CH OUTPUT
REAR
CENTER
WOOFER
L
R
OPTICAL
COAXIAL
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
l: Signal flow
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
5.1ch inputs or/and a decoder
5.1ch inputs or/and a decoder
Subwoofer
Centre
Coaxial digital cord
(not supplied)
(not supplied)
Monaural audio cord
(not supplied)
(not supplied)
Stereo audio cord
(not supplied)
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
[Speakers]
CD/DVD player
[Speakers]
Rear (L)
to audio input
to coaxial or optical
digital input
digital input
or
or
to 5.1CH
OUTPUT
OUTPUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
27
H
o
o
kups
: Connecting to the 5.1 ch input jacks
You can enjoy 5.1 ch surround sound using
the internal Dolby Digital, MPEG audio,
DTS, or Super Audio CD Multi decoder of
this player. Note that 7.1-channel MPEG
signals are mixed down to 5.1-channel
signals.
the internal Dolby Digital, MPEG audio,
DTS, or Super Audio CD Multi decoder of
this player. Note that 7.1-channel MPEG
signals are mixed down to 5.1-channel
signals.
: Connecting to a digital input jack
This connection will allow you to use the
Dolby Digital, MPEG audio, or DTS decoder
function of your AV amplifier (receiver). You
are not able to enjoy the surround sound
effects of this player.
Dolby Digital, MPEG audio, or DTS decoder
function of your AV amplifier (receiver). You
are not able to enjoy the surround sound
effects of this player.
z
Hints
• For connection
For correct speaker location, refer to the operating
instructions of the connected components.
instructions of the connected components.
• To enhance the sound performance:
– Use high-performance speakers.
– Use front, rear, and centre speakers of the same
– Use high-performance speakers.
– Use front, rear, and centre speakers of the same
size and performance.
– Place the subwoofer between the left and right
front speakers.
Notes
For connection
• After you have completed the connection, be sure
• After you have completed the connection, be sure
to set “DOLBY DIGITAL” to “DOLBY
DIGITAL” and “DTS” to “DTS” in Quick Setup
(page 28). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” in
“AUDIO SETUP” to “MPEG”.
DIGITAL” and “DTS” to “DTS” in Quick Setup
(page 28). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” in
“AUDIO SETUP” to “MPEG”.
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
“48kHz/96kHz PCM” in “AUDIO SETUP” to
“96kHz/24bit” (page 86).
“48kHz/96kHz PCM” in “AUDIO SETUP” to
“96kHz/24bit” (page 86).
• Super Audio CD audio signals are not output from
the DIGITAL OUT jack.
D-1
D-2
D-2
D-2
28
Step 5: Connecting the Mains Lead
Plug the player and TV mains lead (power cord) into a mains.
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
To skip an adjustment, press >. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
TV so that the signal from the
player appears on the TV screen.
“Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 81).
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 81).
4
Press ENTER without inserting a
disc.
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
language used in the on-screen display
appears.
5
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
subtitles in the selected language.
ENTER
"/1
./>
X/x
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
ITALIANO
ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
FRANÇAIS
ENGLISH
ENGLISH
DEUTSCH
Click on the first or last page to see other DVP-NS955V service manuals if exist.