Read Sony DVP-NS715P Service Manual online
1-14
58
◆ When you have already registered a
password
The display for entering the password
appears.
password
The display for entering the password
appears.
4
Enter or re-enter your 4-digit password
using the number buttons, then press
ENTER.
using the number buttons, then press
ENTER.
The display for setting the playback
limitation level appears.
limitation level appears.
5
Press
X/x to select “STANDARD,”
then press ENTER.
The selection items for “STANDARD”
are displayed.
are displayed.
6
Press
X/x to select a geographic area
as the playback limitation level, then
press ENTER.
press ENTER.
The area is selected.
When you select “OTHERS t,” select
and enter a standard code in the table on
page 59 using the number buttons.
When you select “OTHERS t,” select
and enter a standard code in the table on
page 59 using the number buttons.
7
Press
X/x to select “LEVEL,” then
press ENTER.
The selection items for “LEVEL” are
displayed.
displayed.
8
Select the level you want using
X/x,
then press ENTER.
Parental Control setting is complete.
The lower the value, the stricter the
limitation.
limitation.
To turn off the Parental Control function
Set “LEVEL” to “OFF” in Step 8.
To play a disc for which Parental Control is
set
set
1
Insert the disc and press H.
The display for entering your password
appears.
The display for entering your password
appears.
2
Enter your 4-digit password using the
number buttons, then press ENTER.
The player starts playback.
number buttons, then press ENTER.
The player starts playback.
z Hint
If you forget your password, remove the disc and
repeat Steps 1 to 3 of “Parental Control (limited
playback).” When you are asked to enter your
password, enter “199703” using the number
buttons, then press ENTER. The display will ask
you to enter a new 4-digit password. After you enter
a new 4-digit password, replace the disc in the
player and press H. When the display for entering
your password appears, enter your new password.
If you forget your password, remove the disc and
repeat Steps 1 to 3 of “Parental Control (limited
playback).” When you are asked to enter your
password, enter “199703” using the number
buttons, then press ENTER. The display will ask
you to enter a new 4-digit password. After you enter
a new 4-digit password, replace the disc in the
player and press H. When the display for entering
your password appears, enter your new password.
Notes
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this player.
limited on this player.
• Depending on the disc, you may be asked to
change the parental control level while playing
PARENTAL CONTROL
Enter password, then press
.
ENTER
PARENTAL CONTROL
LEVEL:
OFF
USA
USA
STANDARD:
PARENTAL CONTROL
LEVEL:
OFF
USA
USA
STANDARD:
USA
OTHERS
PARENTAL CONTROL
LEVEL:
OFF
OFF
STANDARD:
8:
7:
6:
5:
7:
6:
5:
NC17
R
PARENTAL CONTROL
LEVEL:
STANDARD:
STANDARD:
USA
4:
PG13
59
Us
in
in
g Vari
ous
A
ddi
tiona
l Fun
tiona
l Fun
ct
io
ns
the disc. In this case, enter your password, then
change the level. If the Resume Play mode is
canceled, the level returns to the original level.
change the level. If the Resume Play mode is
canceled, the level returns to the original level.
Area Code
Changing the password
1
Press DISPLAY while the player is in
stop mode.
stop mode.
The Control Menu appears.
2
Press
X/x to select
(PARENTAL CONTROL), then press
ENTER.
ENTER.
The options for “PARENTAL
CONTROL” appear.
CONTROL” appear.
3
Press
X/x to select “PASSWORD
t,” then press ENTER.
The display for entering the password
appears.
appears.
4
Enter your 4-digit password using the
number buttons, then press ENTER.
number buttons, then press ENTER.
5
Enter a new 4-digit password using the
number buttons, then press ENTER.
number buttons, then press ENTER.
6
To confirm your password, re-enter it
using the number buttons, then press
ENTER.
using the number buttons, then press
ENTER.
If you make a mistake entering your
password
password
Press C before you press ENTER and input
the correct number.
the correct number.
If you make a mistake
Press O RETURN.
To turn off the display
Press DISPLAY repeatedly until the display
is turned off.
is turned off.
Standard
Code number
Argentina
2044
Australia
2047
Austria
2046
Belgium
2057
Brazil
2070
Canada
2079
Chile
2090
China
2092
Denmark
2115
Finland
2165
France
2174
Germany
2109
India
2248
Indonesia
2238
Italy
2254
Japan
2276
Korea
2304
Malaysia
2363
Mexico
2362
Netherlands
2376
New Zealand
2390
Norway
2379
Pakistan
2427
Philippines
2424
Portugal
2436
Russia
2489
Singapore
2501
Spain
2149
Sweden
2499
Switzerland
2086
Thailand
2528
United Kingdom
2184
60
Operation Sound Effects
(Sound Feedback)
The player beeps when the following
operations are performed.
The default setting of the Sound Feedback
function is set to off.
operations are performed.
The default setting of the Sound Feedback
function is set to off.
Setting Sound Feedback
1
Press
[/1 on the player or the remote.
The power indicator lights up in green.
When there is a disc in the player, press
When there is a disc in the player, press
A and remove the disc. Then press A
again to close the disc tray.
again to close the disc tray.
2
Press and hold
X on the player for
more than two seconds.
You will hear one beep and the Sound
Feedback function is turned on.
Feedback function is turned on.
To turn off the Sound Feedback function
When there is no disc in the player, press and
hold X on the player for more than two
seconds. You will hear two beeps and the
Sound Feedback function is turned off.
hold X on the player for more than two
seconds. You will hear two beeps and the
Sound Feedback function is turned off.
Operation
Operation sound
Power is turned on
One beep
Power is turned off
Two beeps
H is pressed
One beep
X is pressed
Two beeps
Playback is stopped
One long beep
Operation is not possible Three beeps
[/1
Power indicator
A
X
[/1
61
Us
in
in
g Vari
ous
A
ddi
tiona
l Fun
tiona
l Fun
ct
io
ns
Controlling Your TV or AV
Amplifier (Receiver) with
the Supplied Remote
Amplifier (Receiver) with
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote.
If you connect the player with an AV
amplifier (receiver), you can control the
volume with the supplied remote.
control your TV with the supplied remote.
If you connect the player with an AV
amplifier (receiver), you can control the
volume with the supplied remote.
Notes
• Depending on the unit being connected, you may
not be able to control your TV or AV amplifier
(receiver) using some of the buttons below.
(receiver) using some of the buttons below.
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
default setting. Set the appropriate code number
again.
Controlling TVs with the remote
1
Hold down TV
[/1, and enter your TV’s
manufacturer’s code (see “Code
numbers of controllable TVs” below)
using the number buttons.
numbers of controllable TVs” below)
using the number buttons.
2
Release TV
[/1.
The remote is set to perform the following:
* Once you set a code number for your AV
amplifier (receiver), the VOL +/– buttons on the
remote control the AV amplifier’s volume only. If
you would rather control the TV’s volume, set the
code number to “90” (default) to control the TV’s
volume again (page 62).
remote control the AV amplifier’s volume only. If
you would rather control the TV’s volume, set the
code number to “90” (default) to control the TV’s
volume again (page 62).
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
entering them one at a time until you find the
one that works with your TV.
TV [/1
Turns the TV on or off
VOL +/–*
Adjusts the volume of the TV
WIDE MODE
Switches to or from the wide
mode of a SONY’s wide TV
mode of a SONY’s wide TV
TV/VIDEO
Switches the TV’s input
source between the TV and
other input sources
source between the TV and
other input sources
TV
[/1
VOL +/–
WIDE
MODE
MODE
TV/VIDEO
Number
buttons
buttons
Manufacturer Code
number
Sony (default) 01
Akai
04
AOC
04
Centurion
12
Coronado
03
Curtis-Mathes 12
Daytron
12
Emerson
03,04,
14
14
Fisher
11
General
Electric
Electric
06,10
Gold Star
03,04,
17
17
Hitachi
02,03
J.C.Penney
04,12
JVC
09
KMC
03
Magnavox
03,08,
12
12
Marantz
04,13
MGA/
Mitsubishi
Mitsubishi
04,12,
13,17
13,17
NEC
04,12
Panasonic
06,19
Philco
03,04
Philips
08,21
Pioneer
16
Portland
03
Proscan
10
Quasar
06,18
Radio Shack 05,14
RCA
04,10
Sampo
12
Samsung
03,12,
20
20
Sanyo
11,14
Scott
12
Sears
07,10,
11
11
Sharp
03,05,
18
18
Sylvania
08,12
Teknika
03,08,
14
14
Toshiba
07
Wards
03,04,
12
12
Yorx
12
Zenith
15
Manufacturer Code
number
,continued
Click on the first or last page to see other DVP-NS715P service manuals if exist.