Read Sony DVP-NS400D Service Manual online
1-5
22
z
To enhance the surround sound effects:
•
Use high-performance speakers.
•
Use front, rear, and center speakers having the same size and performance.
•
Place a subwoofer between the right and left front speakers.
•
Refer to the operating instructions of the AV receiver (amplifier) for correct speaker setting location.
5.1CH OUTPUT
WOOFER
L
R
PCM/DTS/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO 1-L
VIDEO 1
Y
P
B
P
R
R-AUDIO 2-L
VIDEO 2
DIGITAL OUT
LINE OUT
1
2
FRONT
REAR CENTER
PCM/DTS/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
B-2
B-1
OPTICAL
5.1CH OUTPUT
WOOFER
L
FRONT
REAR CENTER
R
Rear
(L)
AV amplifier (receiver) having
5.1ch inputs or/and a decoder
Subwoofer
Center
Stereo audio cord
(not supplied)
(not supplied)
Coaxial digital cord
(not supplied)
(not supplied)
Monoural audio cord
(not supplied)
(not supplied)
[Speakers]
CD/DVD player
[Speakers]
Front (L)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital input
to audio input
l
: Signal flow
Rear
(R)
Front
(R)
or
or
Hookups
23
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the
amplifier (receiver) has a digital input jack, use
. When connecting to an MD deck or a DAT
deck, use
. In this case, you can also connect the player directly to the MD deck or DAT
deck with using your stereo amplifier (receiver).
xRecommended surround sound effects for the
connection only.
•
TVS STANDARD (page 50)
z
In connection
, you can use the supplied audio/video cord instead of using a separate audio cord.
z
To realize better surround sound effects, make sure that your listening position is in between your speakers.
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
C
C-1
C-2
C-2
C-1
C-1
PCM/DTS/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO 1-L
VIDEO 1
Y
P
B
P
R
R-AUDIO 2-L
VIDEO 2
DIGITAL OUT
LINE OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
C-2
5.1CH OUTPUT
WOOFER
L
R
FRONT
REAR CENTER
1
2
C-1
VIDEO 1
R-AUDIO 2-L
VIDEO 2
LINE OUT
R-AUDIO 1-L
l
: Signal flow
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front
(L)
Front
(R)
[Speakers]
(white)
(red)
(white)
(red)
Coaxial digital
cord (not supplied)
cord (not supplied)
Stereo audio cord
(not supplied)
(not supplied)
to audio input
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital input
continued
24
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital or
DTS decoder, refer to page 21.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has L and R audio input jacks only, use
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital or
DTS decoder, refer to page 21.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
xRecommended surround sound effects using this connection with your amplifier (receiver).
•
Dolby Surround (Pro Logic) (page 79)
z
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
∗
When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a subwoofer.
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
D
D-1
D-2
LINE OUT
PCM/DTS/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO 1-L
VIDEO 1
Y
P
B
P
R
R-AUDIO 2-L
VIDEO 2
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
D-2
D-1
VIDEO 1
R-AUDIO 2-L
VIDEO 2
LINE OUT
R-AUDIO 1-L
5.1CH OUTPUT
WOOFER
L
R
FRONT
REAR CENTER
1
2
CD/DVD player
or
Front
(R)
Front
(L)
Rear
(R)
Subwoofer
l
: Signal flow
Rear
(L)
Dolby Surround amplifier (receiver)
Rear
*
(mono)
Stereo audio cord
(not supplied)
(not supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(not supplied)
(white)
(red)
to audio input
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
Center
to coaxial or optical digital input
[Speakers]
(white)
(red)
Hookups
25
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Do not connect the power cord of your player to the “switched” power socket of an amplifier
(receiver). When you turn off the power of your amplifier (receiver) the menu setting for the
player such as Playback Memory may be lost.
(receiver). When you turn off the power of your amplifier (receiver) the menu setting for the
player such as Playback Memory may be lost.
Step 4: Quick Setup
Follow the steps below to make the minimum number of base adjustments use the player. To skip
an adjustment, press >. To return to the previous adjustment, press ..
an adjustment, press >. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Switch the input selector on the TV to the player.
3
Press POWER on the player and press [
/
1
on the remote.
“Press [ENTER] to run QUICK SETUP” appears at the bottom of the screen. If this message
does not appear, select “QUICK” under “SETUP” in the Control Menu to run Quick Setup (page
65).
does not appear, select “QUICK” under “SETUP” in the Control Menu to run Quick Setup (page
65).
4
Press ENTER without inserting a disc.
The Setup Display for selecting the language used in the on-screen display appears.
1
2
3
4
5
6
7
8
0
9
.
/
> X
/
x
POWER
.
/
>
X
/
x
ENTER
ENTER
[
/
1
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
DVD MENU:
AUDIO:
SUBTITLE:
FRENCH
ENGLISH
ENGLISH
ENGLISH
SPANISH
PORTUGUESE
continued
Click on the first or last page to see other DVP-NS400D service manuals if exist.