Read Sony DVP-NS400D Service Manual online
1-3
14
Getting Started
Quick Overview
A quick overview presented in this chapter will give you enough information to start using the
player for your enjoyment. To use the surround sound features of this player, refer to “Hookups”
on page 17.
player for your enjoyment. To use the surround sound features of this player, refer to “Hookups”
on page 17.
Note
You cannot connect this player to a TV that does not have a video input jack.
Be sure to turn off the power of each component before connecting.
Be sure to turn off the power of each component before connecting.
Step 1: Unpacking
Check that you have the following items:
•
Audio/video cord (pinplug
×
3 y pinplug
×
3) (1)
•
Remote commander (remote) RMT-D128A (1)
•
Size AA (R6) batteries (2)
Step 2: Inserting Batteries into the Remote
You can control the player using the supplied remote. Insert two size AA (R6) batteries by
matching the 3 and # ends on the batteries to the markings inside the compartment. When using
the remote, point it at the remote sensor
matching the 3 and # ends on the batteries to the markings inside the compartment. When using
the remote, point it at the remote sensor
on the player.
Notes
•
Do not leave the remote in an extremely hot or humid place.
•
Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
•
Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a
malfunction.
malfunction.
•
If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
battery leakage and corrosion.
15
Ge
tting S
tting S
ta
rte
d
Step 3: TV Hookups
Connect the supplied audio/video cord and power cord in the order (1~3) shown below. Be
sure to connect the power cord last.
sure to connect the power cord last.
When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen.
If you want to change the aspect ratio, please refer to page 67.
If you want to change the aspect ratio, please refer to page 67.
PCM/DTS/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO 1-L
VIDEO 1
Y
PB
PR
R-AUDIO 2-L
VIDEO 2
DIGITAL OUT
LINE OUT
5.1CH OUTPUT
WOOFER
L
R
FRONT
REAR CENTER
1
2
R-AUDIO 1-L
VIDEO 1
R-AUDIO 2-L
VIDEO 2
LINE OUT
VIDEO
AUDIO
INPUT
L
R
(yellow)
(white)
(red)
3
Power source
CD/DVD Player
TV
2
Power source
l
: Signal flow
to video input
to LINE OUT
L/R (AUDIO) 1
L/R (AUDIO) 1
1
Audio/video
cord (supplied)
to audio input
to LINE OUT (VIDEO) 1
16
Step 4: Playing a Disc
1
Turn on the TV.
2
Switch the input selector on the TV to the player.
3
Press POWER on the player.
4
Press A on the player to open the disc tray.
5
Place the disc on the tray with the playback side facing down.
6
Press H.
The disc tray closes and the player begins playing the disc.
After Step 6
Depending on the disc, a menu may be displayed on the TV screen. If so, select the item you want
from the menu and play the DVD (page 33) or VIDEO CD disc (page 34).
from the menu and play the DVD (page 33) or VIDEO CD disc (page 34).
To stop playing
Press x.
To take out the disc
Press A.
To turn off the player
Press ^/1 on the remote. The player is set to standby mode and the power indicator lights up in
red. Press POWER on the player to turn off completely.
red. Press POWER on the player to turn off completely.
With the playback side facing down
Hookups
17
Hookups
Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 14).
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 14).
Notes
•
Plug cords securely to prevent unwanted noise.
•
Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector or, AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
INPUT
S VIDEO
B
PCM/DTS/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO 1-L
VIDEO 1
Y
P
B
P
R
R-AUDIO 2-L
VIDEO 2
DIGITAL OUT
LINE OUT
P
R
P
B
Y
COMPONENT
VIDEO IN
C
AUDIO
INPUT
L
R
A
5.1CH OUTPUT
WOOFER
L
R
FRONT
REAR CENTER
1
2
VIDEO
CD/DVD player
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
l
: Signal flow
Audio/video
cord (supplied)
cord (supplied)
(yellow)
(yellow)
Component video
cord (not supplied)
cord (not supplied)
S VIDEO cord
(not supplied)
(not supplied)
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
TV, projector or AV
amplifier (receiver )
amplifier (receiver )
continued
Click on the first or last page to see other DVP-NS400D service manuals if exist.