DVP-NC650V - Sony DVD Service Manual (repair manual). Page 15

Read Sony DVP-NC650V Service Manual online

1-7
30
Press X/x to select the item.
Choose the item that matches the audio connection you selected in pages 22 to 26 (
 
through ).
Press ENTER.
“DTS” is selected.
Press X/x to select the item.
Choose the item that matches the audio connection you selected in pages 22 to 26 (
 
through ).
Press ENTER.
• When “DIGITAL OUTPUT” is selected in Step 8, Quick Setup is finished. All 
connections and setup operations are complete.
• When “DIGITAL & 5.1CH OUTPUT” is selected in Step 8, the Setup display for 
“SPEAKER SETUP” appears.
Audio Cord Connection Type
You select
Page
 
D-PCM
83
DOLBY DIGITAL (only if the 
amplifier/receiver has a Dolby Digital 
decoder)
83
Audio Cord Connection Type
You select
Page
 
D-PCM
83
DTS (only if the amplifier/receiver 
has a DTS decoder)
83
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS:
DOLBY DIGITAL
C-2
D-2
B-2
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS
DTS:
D-PCM
B
D
C-2
D-2
B-2
31
Hookups
Press X/x to select the size of the center speaker.
If no center speaker is connected, select “NONE.” Refer to page 86 for each selection item.
Press ENTER.
The Setup Display for selecting the size of the rear speaker appears.
Press X/x to select the size.
If no rear speaker is connected, select “NONE.”
“SIDE” and “REAR” refer to the speakers’ position relative to your listening position.
Refer to page 86 for each selection item.
Press ENTER.
The Setup Display for selecting whether or not you have connected a subwoofer appears.
Press X/x to select the item.
Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL: 
OFF
TEST TONE:
FRONT:
CENTER:
SMALL
LARGE
NONE
LARGE
REAR:
SUBWOOFER:
To set, press                , then            .
To quit press
ENTER
SETUP
DISPLAY
NONE
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL: 
OFF
TEST TONE:
FRONT:
CENTER:
LARGE
REAR:
SUBWOOFER:
NONE
LARGE(REAR)
NONE
LARGE
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL: 
OFF
TEST TONE:
FRONT:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press                , then            .
To quit, press            .
ENTER
ENTER
SETUP
.
DISPLAY
DISPLAY
NONE
NONE
YES
LARGE(REAR)
continued 
32
Note
You can directly start Quick Setup only when you run it for the first time. 
To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 77).
Enjoying the surround sound effects
To enjoy the surround sound effects of this player or your amplifier (receiver), the following 
items must be set as described below for the audio connection you selected in pages 22 to 26 
(
 through 
). Each of these are the default settings and do not need to be adjusted when 
you first connect the player. Refer to page 77 for using the Setup Display.
Audio Connection (pages 21 to 26)
No additional settings are needed.
• If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 
83).
• Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that 
conforms to 96 kHz digital audio input (page 85).
• If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 
83).
Item
You select
Page
DISTANCE
BALANCE
LEVEL
Set according to the connected 
speakers
86
Item
You select
Page
DOWNMIX
DOLBY SURROUND
84
DIGITAL OUT
ON
84
Item
You select
Page
DOWNMIX
DOLBY SURROUND
84
B
D
A
B-1
B-2
C-2
D-2
C-1
D-1
33
P
layin
g
 D
iscs
Playing Discs
Playing Discs 
Depending on the DVD or VIDEO CD, some 
operations may be different or restricted.
Refer to the operating instructions supplied 
with your disc.
1
Turn on your TV.
2
Switch the input selector on the TV 
to the player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and 
select the appropriate channel.
3
Press POWER.
The player enters standby mode and the 
power indicator lights up in red.
4
Press 
A
 on the player, and place a 
disc on the disc tray.
The player automatically turns on and the 
power indicator lights up in green.
To place other discs on the tray, press 
DISC SKIP and place the discs in the 
order you want to play them.
Each time you press DISC SKIP, the disc 
tray turns so you can place the discs on 
the empty compartments. The player 
plays from the last disc placed on the 
tray.
5
Press 
H
.
The disc tray closes, and the player starts 
playback (continuous play). Adjust the 
volume on the TV or the amplifier 
(receiver).
After following Step 5
Depending on the disc, a menu may appear 
on the TV screen. You can play the disc 
interactively by following the instructions on 
the menu. DVD VIDEO (page 37), VIDEO 
CD (page 39).
1
2
3
4
5
6
7
8
9
0
x
H
H
x
?/1
DISC SKIP
PHONES
LEVEL
POWER
DISC 
SKIP
X
Power indicator
With the playback 
side facing down
Disc compartment 
number
continued 
Page of 126
Display

Click on the first or last page to see other DVP-NC650V service manuals if exist.