DVP-NC650V - Sony DVD Service Manual (repair manual). Page 14

This connection will allow you to enjoy the surround effects of the Dolby Surround (Pro Logic) 
decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a 
Dolby Digital or DTS decoder, refer to page 22.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or 
multichannel audio (Dolby Digital) discs.
This connection needs a minimum of 3 speakers (front L and R, and rear (monaural)). The 
surround effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) 
are used.
If your amplifier (receiver) has R and L audio input jacks only, use 

. If your amplifier 

(receiver) has a digital input jack, use 

.

xRecommended surround sound effects using this connection with your amplifier (receiver)

• Dolby Surround (Pro Logic) (page 92)

z

For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).

SACD audio signals are not output from a digital jack.

* When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a 

subwoofer.

Plug the player and TV power cords into an AC outlet.

Do not connect the power cord of your player to the “switched” power socket of an amplifier 
(receiver). Otherwise, when you turn off the power of your amplifier (receiver), the settings for 
the player may be lost.

to audio input

SACD/DVD player

Optical digital cord 
(not supplied)
Remove the jack cap 
before connecting.

Stereo audio cord 
(not supplied)

to coaxial or optical 
digital input

(white)

(red)

Amplifier (receiver) with 

Dolby Surround decoder

[Speakers]

[Speakers]

Rear (L)

Rear (R)

Subwoofer

Center

Rear* 
(mono)

Front (L)

Front (R)

l

: Signal flow

or

(white)

(red)

Coaxial digital cord 
(not supplied)

or

Follow the steps below to make the minimum number of basic adjustments to use the player. To 
skip an adjustment press >, to return to the previous adjustment, press ..

A Turn on the TV.

B Switch the input selector on the TV to the player.

C Press POWER on the player and press 

?/1

“Press [ENTER] to run QUICK SETUP.” appears at the bottom of the screen. If this message 
does not appear, select “QUICK” under “SETUP” in the Control Menu (page 77) to run Quick 
Setup.

D Press ENTER without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

E Press X/x to select a language.

The player uses the language selected here to display the menu and subtitles as well. 

1

2

3

4

5

6

7

8

9

0

?

/

1

./>

X

/

x

ENTER

POWER

X

/

x

,

 

ENTER

./>

LANGUAGE SETUP

OSD:
MENU:
AUDIO:
SUBTITLE:

FRENCH

ENGLISH
ENGLISH

SPANISH

PORTUGUESE

F Press ENTER.

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

G Press X/x to select the item.

H Press ENTER.

The Setup Display for selecting the type of jack used to connect your amplifier (receiver) 
appears.

I Press X/x to select the item, then press ENTER.

• When “NO” or “LINE OUTPUT L/R (AUDIO)” is selected, Quick Setup is finished and 

connections are complete.

• When “DIGITAL OUTPUT” or “DIGITAL & 5.1CH OUTPUT” is selected, the Setup 

Display for “DOLBY DIGITAL” appears.

4:3 standard TV

4:3 LETTER BOX or 4:3 
PAN SCAN

79

A wide-screen TV or 4:3 standard TV with the 
wide-screen mode

16:9

79

 

LINE OUTPUT L/R (AUDIO)

 

 

DIGITAL OUTPUT

 or both 

 and 

DIGITAL & 5.1CH OUTPUT

NO

SCREEN SETUP

TV TYPE:
SCREEN SAVER:
BACKGROUND:

16:9

4:3 LETTER BOX

4:3 PAN SCAN

4:3 LETTER BOX

Is this player connected to an amplifier 
(receiver)? Select the type of jack you 
are using.

LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT

YES

NO