Read Sony DVP-NC650V Service Manual online
1-4
18
Hookups
Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 15).
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 15).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
Audio/video cord
(supplied)
(supplied)
S VIDEO cord
(supplied)
(supplied)
SACD/DVD player
TV, projector, AV
amplifier (receiver)
amplifier (receiver)
(yellow)
(green)
TV, projector, AV
amplifier (receiver)
amplifier (receiver)
(yellow)
l
: Signal flow
TV, projector, AV
amplifier (receiver)
amplifier (receiver)
(green)
(blue)
(red)
(blue)
(red)
Component video
cord (not supplied)
cord (not supplied)
19
Hookups
A
If you are connecting to a video input jack
Connect the yellow plugs of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 21).
B
If you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (supplied). You will enjoy high quality images.
B
If you are connecting to a monitor, projector, or AV amplifier (receiver) having
component video input jacks (Y, P
B
, P
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using the component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy
accurate color reproduction and high quality images.
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy
accurate color reproduction and high quality images.
Note
Do not connect your player to a VCR. You may not receive a clear image on the TV screen if you pass the player
signals via the VCR.
signals via the VCR.
Yellow (Video)
White (L)
Red (R)
Yellow
White (L)
Red (R)
Green
Blue
Red
Green
Blue
Red
VCR
SACD/DVD player
TV
Connect directly.
20
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections,
through
.
z
To enjoy SACD Multi or 96 kHz/24 bit sound, use connection
.
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
reserved.
** Manufactured under license from Digital Theater Systems, Inc. US PAT. No. 5,451,942 and other world-wide
patents issues and pending. “DTS” and “DTS Digital surround” are trademarks of Digital Theater Systems, Inc.
© 1996 Digital Theater Systems, Inc. All rights reserved.
© 1996 Digital Theater Systems, Inc. All rights reserved.
Connection
Components to be connected
(page
21)
TV (stereo)
(page
22)
AV amplifier (receiver) having 5.1ch input jacks
• 4 speakers
(front L and R, rear L and R)
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
(page
22)
AV amplifier (receiver) having a Dolby* Digital or DTS** decoder,
and a digital input jack
and a digital input jack
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
(page
24)
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
(having L and R audio input jacks only, or having a digital input jack)
• 2 speakers
(front L and R)
(page
24)
MD deck/DAT deck
(page
26)
AV amplifier (receiver) with a Dolby Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
(having L and R audio input jacks only, or having a digital input jack)
• 3 speakers
(front L and R, and rear (monaural))
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
A
D
A
B
B
C
C
D
B
21
Hookups
Connecting to your TV
This connection will use your TV speakers for sound.
xRecommended surround sound effects for this connection
• TVS DYNAMIC (page 58)
• TVS WIDE (page 58)
• TVS WIDE (page 58)
The yellow plug is used for video signals (page 18).
A
Audio/video
cord
(supplied)
cord
(supplied)
SACD/DVD player
(white)
(red)
(yellow)
(white)
(red)
(yellow)
l
: Signal flow
TV
to audio input
continued
Click on the first or last page to see other DVP-NC650V service manuals if exist.