Read Sony DVP-F41MS Service Manual online
1-6
26
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an
MD deck or DAT deck
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the
amplifier (receiver) has a digital input jack, use
. When connecting to an MD deck or a DAT
deck, use
. In this case, you can also connect the player directly to the MD deck or DAT
deck without using your stereo amplifier (receiver).
xRecommended surround sound effects for the
connection only.
• TVS STANDARD (page 59)
z
In connection
, you can use the supplied audio/video cord instead of using a separate audio cord.
z
To realize better surround sound effects, make sure that your listening position is in between your speakers.
Notes
• If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the
connection.
• MP3 audio and ATRAC3 audio tracks will not be output from the DIGITAL OUT (OPTICAL) jack.
B
B-1
B-2
B-2
B-1
B-1
B-2
27
Hookups
Stereo amplifier (receiver)
CD/DVD player
Stereo audio cord
(not supplied)
(not supplied)
Optical digital cord
(not supplied)
(not supplied)
to audio input
to optical digital
input
input
(white)
(red)
(white)
(red)
[Speakers]
Front (L)
Front (R)
MD deck/DAT deck
or
l: Signal flow
to AUDIO
OUT R
OUT R
to AUDIO
OUT L
OUT L
to DIGITAL OUT
(OPTICAL)
(OPTICAL)
AC power adaptor
(AC-F21, supplied)
(AC-F21, supplied)
AC power cord
(supplied)
(supplied)
(white) (red)
continued
,
28
Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and
3 to 6 speakers
This connection will allow you to enjoy the surround effects of the Dolby Surround (Pro Logic)
decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a
Dolby Digital or DTS decoder, refer to page 30.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or
multichannel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has R and L audio input jacks only, use
decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a
Dolby Digital or DTS decoder, refer to page 30.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or
multichannel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has R and L audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
xRecommended surround sound effects using this connection with your amplifier (receiver).
• Dolby Surround (Pro Logic) (page 91)
z
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
Note
MP3 audio and ATRAC3 audio tracks will not be output from the DIGITAL OUT (OPTICAL) jack.
C
C-1
C-2
29
Hookups
* When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
subwoofer.
to audio input
CD/DVD player
Optical digital cord
(not supplied)
(not supplied)
Stereo audio cord
(not supplied)
(not supplied)
to optical digital
input
input
(white)
(red)
(white)
(red)
Amplifier (receiver) with
Dolby Surround decoder
[Speakers]
[Speakers]
Rear (L)
Rear (R)
Subwoofer
Center
Rear*
(mono)
(mono)
Front (L)
Front (R)
l: Signal flow
or
to AUDIO
OUT R
OUT R
to AUDIO
OUT L
OUT L
to DIGITAL OUT
(OPTICAL)
(OPTICAL)
AC power adaptor
(AC-F21, supplied)
(AC-F21, supplied)
AC power cord
(supplied)
(supplied)
(white)
(red)
continued
,
Click on the first or last page to see other DVP-F41MS service manuals if exist.