Read Sony DVP-F41MS Service Manual online
1-4
18
If you cannot operate the player with the remote
The player has 2 remote sensors, one at the top and one on the front (page 20). If one of the remote
sensor is exposed to direct sunlight or lighting apparatus, the remote may not operate correctly.
If this happens, select a remote sensor in the following way until you find one that works. (If the
MS indicator on the player is lit, turn it off by pressing MS.)
sensor is exposed to direct sunlight or lighting apparatus, the remote may not operate correctly.
If this happens, select a remote sensor in the following way until you find one that works. (If the
MS indicator on the player is lit, turn it off by pressing MS.)
When the power is on and no disc is inserted in the player, press
. for more than 2 seconds
while pressing
x.
The selected remote sensor is displayed on the front panel display as follows:
* The default setting
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
BOTH* (The player
receives the remote
signal at both remote
sensors.)
receives the remote
signal at both remote
sensors.)
TOP (The player
receives the remote
signal at the top
remote sensor.)
receives the remote
signal at the top
remote sensor.)
FRONT (The player
receives the remote
signal at the front
remote sensor.)
receives the remote
signal at the front
remote sensor.)
t
t
19
Ge
tti
ng S
tti
ng S
ta
rte
d
19
Step 3: TV Hookups
Remove the jack cover from the player (see fig.
A). Connect the supplied audio/video cord and
power cord in the order (
1~3) shown below. Be sure to connect the power cord last.
When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen.
If you want to change the aspect ratio, please refer to page 87.
If you want to change the aspect ratio, please refer to page 87.
3 Power source
1 Audio/video cord
(supplied)
(supplied)
CD/DVD Player
TV
2 Power source
l: Signal flow
to video input
to AUDIO
OUT L
OUT L
(red)
(white)
(yellow)
to VIDEO
OUT
OUT
(red)
(white)
(yellow)
to audio input
(yellow)
(white)
(red)
AC power adaptor
(AC-F21, supplied)
(AC-F21, supplied)
to
AUDIO
OUT R
AUDIO
OUT R
(white) (red)
(yellow)
AC power cord
(supplied)
(supplied)
20
Step 4: Playing a Disc
A Turn on the TV.
B Switch the input selector on the TV to the player.
C Press
?/1
on the player.
D Insert the disc into the disc slot with the playback side facing down.
E Press
N
.
The player begins playing the disc.
After Step 5
Depending on the disc, a menu may be displayed on the TV screen. If so, select the item you want
from the menu and play the DVD VIDEO (page 41) or VIDEO CD disc (page 42).
from the menu and play the DVD VIDEO (page 41) or VIDEO CD disc (page 42).
To stop playing
Press
x.
To take out the disc
Press
A on the player, then remove the disc.
To turn off the player
Press
?/1. The player is set to standby mode and the ?/1 indicator lights up in red.
z
To play a DATA-CD, see page 67. You can play also a “Memory Stick” on this player, see page 73.
With the playback side facing down
A
Remote
sensor
sensor
Remote
sensor
sensor
21
Hookups
Hookups
Hooking Up the Player
Follow Steps 1 to 5 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 17). Remove the jack cover (page 19).
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 17). Remove the jack cover (page 19).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• Refer to the instructions supplied with the components to be connected.
Click on the first or last page to see other DVP-F41MS service manuals if exist.