Read Sony SLT-A37 / SLT-A37K / SLT-A37M / SLT-A37Y Service Manual online
SLT-A37/A37K/A37M/A37Y_L2
1-4
– ENGLISH –
1-6. METHOD FOR REPLACING THE AS SLIDER B ASSY
Removal Procedure
(1) Remove the spring.
(1) Remove the spring.
Spring
(2) Remove the solder on the enamel wires at two places.
Solder
Solder
(3) Remove the flexible board from the AS Slider B Assy.
Flexible Board
(4) Remove the two screws.
(5) Remove the AS Unit Holder Ball.
AS Unit Holder Ball
(6) Remove the two Bearing Balls.
Bearing Ball
Bearing Ball
(7) Remove the Cap SPs (for Pitch and Yaw).
Cap SP
(8) Remove the Caps (for Pitch and Yaw).
Cap
(9) Remove the AS Slider A Assy.
It can be done easily if A is removed beforehand.
AS Slider A Assy
A
(10) Remove the AS Slider B Assy.
It can be done easily if B is removed beforehand.
AS Slider B Assy
B
(11) Remove the three Bearing Balls.
Bearing Ball
Assembly Procedure
Note: Make sure to perform the assembly procedures after assembling the AS Holder Actuator Assy.
The assembly procedure is the reverse of the removal procedure.
Apply grease to the portions indicated below.
Apply grease to the portions indicated below.
* After applying grease, attach the Bearing Balls.
Bearing Ball
G
G-15
AS Slider B Assy
G
G-15 and G G-116
* After applying grease, attach the Bearing Balls.
Bearing Ball
G
G-15
Bearing Ball
G
G-15
Click on the first or last page to see other SLT-A37 / SLT-A37K / SLT-A37M / SLT-A37Y service manuals if exist.