SLT-A37, SLT-A37K, SLT-A37M, SLT-A37Y - Sony Digital Camera Service Manual (repair manual). Page 4

SLT-A37/A37K/A37M/A37Y_L2

1-1

When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.

The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.

Method of Removal
(1)  Press the MB Mirror Frame Holder Lock SP to raise the P.O.I.

 

MB Mirror Frame Holder Lock SP

(2)  Unjoint the two claws while pressing the P.O.I. backward.

 

Claw

Claw

P.O.I.

 

If the Destination Data file included in the Adjust manual is old, “DESTINATION DATA WRITE” cannot be executed in some cases.
In that case, download a new Destination Data file from the TISS homepage according to the following procedure.

Note 1:  To perform Destination Data Write for this model, the Adjust manual of the DSC-WX50 series must have been installed.
 

Install the Adjust manual of the DSC-WX50 series in advance.

Note 2:  The actual image may differ from the image shown above.

1)  If the Destination Data file in the Adjust manual in use is old, the window shown in Fig. 1 is displayed.
 

Click the [OK] button.

2)  The Destination Data Write window opens.
 

Check the version of the Destination Data file retained in the Adjust manual.

Destination Ver. window

Method of Attachment
(1)  When attaching the P.O.I., make the concave side of it face the 
 

front and attach it downward.

 

Claw

Claw

P.O.I.

Concave side