Read Sony SAL85F14Z Service Manual online
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP09
1.
Assemble the focus cam ring in the groove of
float ring
, threading the guide pin of focus cam ring in the cut portion of fixed holding
tube block.
Note:
Before installation, make the cut portion and the groove of
float ring
in parallel.
When removing the fixed holding tube block, unsolder the FHB flexible unit at the lens mount side first.
2.
Install the fixed holding tube block with two screws in figure.
HELP10
Adhesive bond (B-40): J-6082-614-A
Grease (G-35):
J-6082-621-A
1.
Apply the grease (G-35) to the indicated location of gear base plate (A) block.
2.
Apply the adhesive bond (B-40) to the tips of two screws shown in figure.
Focus Cam Ring
Guide Pin
Groove of
float ring
Cut portion
Fixed Holding Tube Block
Fixed Barrel block
Apply the adhesive bond (B-40)
Apply the grease (G-35)
(All round)
(All round)
Apply the grease (G-35)
(All round)
(All round)
Apply the adhesive bond
(B-40)
(B-40)
Ver. 1.3 2007.10
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.2 are shown in blue.
Click on the first or last page to see other SAL85F14Z service manuals if exist.