Read Sony SAL85F14Z Service Manual online
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP04
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-10):
J-6082-612-A
1.
Apply the anti-diffusion agent (A-20) to indicated portion of 1st lens holder A.
2.
Install the 1st ball frame (A) lens block to the 1st lens holder A in orders of 1 to 4.
Note:
After installing the G3 stopper, apply the adhesive bond (B-10) between G3 stopper and 1st lens holder A. (One place in the
width of 10mm)
HELP05
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the tips of two screws shown in figure and tighten the screws.
2
1
3
4
G2 Stopper
G3 Stopper
Lens (G2)
Lens (G3)
1st Lens Holder A
Apply the anti-diffusion agent (A-20) (All round)
Apply the adhesive bond (B-40)
Apply the adhesive bont (B-10)
(One place in the width of 10mm)
(One place in the width of 10mm)
1st Lens Holder A
G3 Stopper
Click on the first or last page to see other SAL85F14Z service manuals if exist.